Feature●Domestic Shipping●A_GEN_TAX●Hole Size Required: 4.0. This is the size of the hole you will need to CUT●Inside Usable Diameter: 3.74. This is the usable INSIDE area to pass wires●Grommet Insert Width: 3.993. This is the MEASURED width of the grommet●Rigid PVC plastic materialDescription
Organize your cables with professional desk and cabinet cable-pass through grommets. Cut hole to size specified and either press or glue into place.
Specifications:
- Cut-hole Size Required: 4.0.
- Grommet Insert Width: 3.993
- Grommet Lid Width: 4.3
- Grommet Depth: 0.622
- Inside Usable Diameter (Approx): 3.74
- Size Tolerances May VaryImportant Installation Note: The Grommets are manufactured to be slightly less that the hole size. For example if we have a grommet advertised at 3.0 inches (example size ONLY) when measured on a caliper it will measure at approx. 2.973 inches - or approx .027 inches LESS than the hole size of 3 inches. This difference is by design to allow for the grommet to be inserted into the CUT hole size. These grommets after inserted into a cut hole are intended to move freely. If you need a TIGHT fit a small amount of glue or silicon may be needed.
Please see technical drawing (Product Manual) below for size and shape details.