Features of PRO-D7 KIT:

Bass Drum Microphone:

• Steel grill, Aluminum body, Zinc alloy hardware
• Fits any mic stands, Anti-wind filter inside the grill
• Element: Dynamic, Polar Pattern: Cardioid
• Frequency response is engineered to be perfect for kick drums
• Studio quality performance make these perfect for recording or live shows
• Sounds great even at high SPL levels
• Rejection of unwanted noises, XLR Output
• Integrated flexible mounting hardware, Large diaphragm delivers accurate low frequencies
• Frequency Response: 30Hz - 12KHz, Sensitivity: -58dB±5dB(0dB=1V/Pa at 1KHz)
• Output Impendence: 600Ω±30%(at 1kHz), Microphone Length: 4.72 inches
• Microphone Max. Diameter: 2.01 inches, Microphone Weight: 0.77 Lbs

Snare Drum Microphone:

• Steel grill, Aluminum body
• Zinc alloy hardware, Fits any mic stands
• Anti-wind filter inside the grill, Element: Dynamic
• Polar Pattern: Cardioid
• Large diaphragm delivers accurate frequency response
• Frequency response is engineered to be perfect for tom-toms and snare drums
• Studio quality performance make these perfect for recording or live shows
• Sounds great even at high SPL levels
• Rejection of unwanted noises, XLR Output
• Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
• Frequency Response: 60Hz-13KHz
• Sensitivity: -54dB±3dB (0dB=1V/Pa at 1KHz)
• Output Impendence: 600Ω ±30% (at 1kHz)
• Microphone Length: 4.53 inches
• Microphone Max. Diameter: 1.61 inches
• Microphone Weight: 0.44 Lbs

Overhead Condenser Microphones:

• Overhead cardioid condenser microphone
• Steel grill, Aluminum body
• Anti-wind filter inside the grill, Element: condenser
• 16 MM large diameter cartridge has amazing sound
• Polar Pattern: Cardioid, Large diaphragm delivers accurate frequency response
• Frequency response is extremely flat and engineered to be perfect for cymbals and other drums
• Studio quality performance make these perfect for recording or live shows
• Sounds great even at high SPL levels, Rejection of unwanted noises
• XLR Output, Mounting hardware has a swivel joint with quick release latch for easy and flexible positioning
• Low mass diaphragm
• Frequency Response: 70Hz-20KHz
• Sensitivity: 13mV/Pa
• Output Impendence: 2000 Ohms (at 1kHz)
• Max SPL: 127dB(at 1kHz=1% T.H.D)
• S/N ratio: 96dB
• Power Supply: Phantom 48V or DC1.5V
• Microphone Length: 8.46 inches
• Microphone Max. Diameter: 1.06 inches
• Microphone Weight: 0.22 Lbs

Features for Case:

• Aluminum case holds all the microphones and mounts
• Protective foam makes sure your mics stay in perfect condition when you travel
• Carry handle makes it easy to carry the case from gig to gig
• High quality case with good looking design
• Buckle latch secures the case closed
• Protective foam is molded for each microphone and clip
• Dimensions of case: 19.1” x 13.4” x 3.94” inches

Features of RVMIC3:

• Rockville RVMIC3 Professional Tripod Microphone Stand With Quick Release Hand Clutch and Boom
• One-hand adjusting using the hand-clutch system (no need to turn knobs to adjust!)
• This mic stand is the easiest and quickest to adjust on the market!
• Leg joint is made out of aluminum (almost all other brands use plastic)
• The stand tubes are 25 mm thick for the bottom tube, and 18mm for the top tube. This is about 50 % thicker than almost all other brands on the market, making this one of the sturdiest stands in the world
• Steel & Nylon Construction
• Virtually Unbreakable (under normal use)
• Small Cable Guiding Clips for running cables along the stand
• Black Color
• Adjustable Height Range: 43-70 inches
• Boom: 30 inches
• Leg Diameter: 0.75 inch
• Top Tube Diameter: 0.6 inches
• Lower Tube Diameter: 0.6 inches
• Boom tube size: 0.79 - 0.39 inch

Description of RKDS:

The RKDS is a multi-purpose mini mic stand. The most popular use of these are for kick drum mic stands, but there are so many other amazing uses for these. They really come in handy for any amp or instrument that has to be on the ground. You can use these to mic up a bass drum, kick drum, snare, guitar amp, or bass amp. (Certain bass players prefer to have a mic). These are also perfect for floor stage mics, as a desk mic, or for use on the dais table at parties and corporate events. Additional uses are for a stand-up bass, or for saxophone players (sitting). There is so many ways these little stands come in handy.

Our stand weighs twice as much as others on the market because these are super-sturdy and solid. The RKDS has a 10.2” Steel Round Base with a rubber pad that eliminates unwanted noises. It has a 21.4" fixed boom arm that provides precise positioning for your mic.

The stand adjusts from 18.7” to 28.7”. This bad-boy Weighs in at 6.6lbs. There is no better stand in its class at this cost assured!

And we topped it off with a scratch-resistant powder coated finish so the stand looks beautiful for life!

This uses a standard thread size of 5/8”inch.

Features of RKDS:

• Rockville Kick Drum/Guitar Amp Mic Stand With Steel Round Base, Fixed Boom and Rubber Pad
• Low profile height adjustable microphone stand for kick drums and guitar amps
• Heavy-duty steel round base with rubber pad provide extreme stability
• Fixed boom arm provides precise positioning
• Scratch-resistant powder coated finish

Specifications of RKDS:

• Booming length : 21.4" (54.5cm)
• Height adjustment : 18.7"- 28.7" (47.5cm ? 73cm)
• Base Diameter : 10.2" (26cm)
• Thread Size : 5/8"
• Weight : 6.6 lbs (3 kgs)