Feature

●1.Be sure to install the camera before power on, the camera bandage must be tightened, otherwise it will not stop shaking, burning the control board.
●2.Please suspend the platform before power on.
●3.After the power is switched on, the platform will automatically balance and return to normal.
●4.The red light is long and bright for the power indicator lamp, and the long and bright yellow lamp is bright.
●5.The roll and pitch motors can be controlled through the receiver or other separate PWM channels.


Description

Descriptions:
1.Metal brushless 2-axis mini gimbal with 2206/100T motor DIY CNC GOPRO3/4 PTZ for FPV aerial photography SJ/Hawkeye.


Specifications:
Material: ABS+Metal
Color: Black
Size: 80x65x80mm/3.14x2.55x3.14in
Weight: 108g/3.81oz
Motor model: 2206/100:2 brushless motor
Driver board: simpleBGC-GUI-2-2B2
Firmware version: o323bgc-realease-v090
Hardware version:GUI-V2.2
Working Voltage:3-4s(10-16V)
Working current: 240Ma
Joystick control angle:
PITCH: -90 degrees, +90 degrees
ROLL: -45 degrees, +45 degrees
Control mode: roll, pitch
Switch control mode:PITCH/ROLL
Scope: 60-100 series sports camera
Power connector: JST/HX

How to install:
1.Remove vibration ball, open at the mounting plate.
2.Lock mounting plate with screws at the bottom of the craft.
3.Install the damping ball.
4.Install the camera, with a girdle bond compact camera.

Package information:
Package size: 10.3x7.3x2cm/4.05x2.87x0.79in
Package weight: 166g/3.81oz
General Box Package


Package Included:
1 x Gimbal Kit
1 x Manual
1 x Accessory


Notes:
1.Pressing the button one at a time and holding it three times will maintain the current position.
2.Control of Roll/Pitch motors via receiver and other separate PWM channels.