Feature
●【No need to disassemble】After using this DJI Mini 2 tablet stand, you don’t need to remove it, it can be directly folded on the remote control, and you don’t need to install it again next time
●【Very stable】Ingeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling
●【Anti-scratch & anti-slip】Anti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the plate from scratching
●【Wide compatibility】Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 11cm-19cm), including iPad Mini (7.9"), iPad (9.7"), iPad Air (10.5"), iPad Pro ( 11"), Galaxy Note (10.1"), Galaxy Tab S7 (11"), etc. You don’t even need to take off your tablet case. Note: iPad Pro 12.9" is not supported!
●【Applicability】for DJI Mini 3 Pro, DJI Mini 2, Mavic Air 2, Mavic Air 2S and DJI Mavic 3
●【Packing list】1* tablet mount, 1* screwdriver, 1* type C to type C data cable(11.8"), 1* type C to IOS data cable(11.8")
●【Note】For a tablet with a 7-inch screen or smaller, please ensure that the width is greater than 4.33 inch, and fix it with a buckle in the middle of the tablet mount!!! In addition, tablet holder is specially designed for tablets and does not support smartphones!
Description
FPVtosky No Disassembly Tablet Holder for DJI Mini Pro 3/ Mini 2 / Mavic Air 2 / Mavic Air 2S with Data Cables
Apply to Tablets of Multiple Size（Only Supports Tablets!）
Apply to tablets of multiple size
Compatible with almost all 7-12 inch tablet computers on the market (the width of the tablet is between 4.33“-7.48”), including
- iPad Mini (7.9in)
- iPad (9.7inch)
- iPad Air (10.5inch)
- iPad Pro ( 11inch)
- Galaxy Note (10.1inch)
- Galaxy Tab S7 (11inch)
- Others 7-12 inch pad
You don’t even need to take off your tablet case.
Note: Not suitable for 12.9" ipad Pro!! Not supports mobile phones!!
|
|
|
|
|---|---|---|
No DisassemblyThe first foldable DJI Mini2 Mavic Air 2 tablet holder mount on the market, after installation, it can be directly folded on the remote control, and there is no need to install it next time. Very convenient. |
Very StableIngeniously designed, the tablet bracket is firmly fixed to the rear of the remote control lever with double screws, even a large ipad can be clamped very firmly, without worrying about the risk of the tablet falling |
Easy to CarryThe tablet holder folded on the remote control can be directly put into the drone bag, which is convenient to carry. Note: Some bags of third-party pre-cut sponges are not supported! |
|
|
|
|
|---|---|---|
Anti-scratch & Anti-slipAnti-scratch and anti-slip silicone pad is added to the contact with the plate to protect the tablet from scratching |
Not Affect Mobile Phone UseAfter installing the foldable tablet holder, will not affect the direct use of smart phones, does not affect the recovery of the original phone holder |
Lightweight & StrongThe net weight of the tablet stand is 49g (1.73oz), and it is made of sturdy ABS engineering plastic, which is stable and durable without adding too much weight. With the lanyard attached to the product, it is safer and more convenient to use. |
Tablet Holder Installation Instructions
Quick installation
- Pull out the remote control and align the groove part of the tablet holder with the back of the remote control rod;
- Tighten the 2 screws on the tablet bracket with the attached direct wrench to fix the plate bracket;
- According to the size of the tablet, pull out the corresponding buckle on the bracket (there are two buckles in the middle and top);
- Put in the tablet
Packing List
- 1 * Tablet holder for DJI Mini 2/Air 2/2S
- 1 * Right angle wrench
- 1 * Type-C to Type-C data cables (11.8in)
- 1 * Type-C to IOS data cables (11.8in)