MikroTik PWR-LINE series devices allow Ethernet like connectivity between supported devices over regular electrical power lines. When plugged into the same electrical circuit, the PWR devices will establish Ethernet connectivity by using the HomePlug AV standard. US MikroTik PWR-LINE series devices allow Ethernet like connectivity between supported devices over regular electrical power lines. When plugged into the same electrical circuit, the PWR devices will establish Ethernet connectivity by using the HomePlug AV standard. The PWR-LINE AP is a wireless access point with a single Ethernet port, a built-in 802.11b/g/n WiFi radio and capability to connect to other PWR-LINE devices through the electrical lines in your premises. Since the device runs the same software as all other MikroTik products, it opens up a wide array of functions, all made possible with the extensive feature set present in RouterOS. US Features Product Code: PL6411-2nD CPU: QCA9533 CPU nominal frequency: 650 MHz PLC chipset: QCA6410 Size of RAM: 64 MB Memory: 16 MB Flash 10/100 Ethernet ports: 1 Wireless: Built-in 2.4GHz 802.11b/g/n, dual-chain Wireless Regulations: Specific frequency range may be limited by country regulations Antenna Gain: 1.5dBi Antenna beam width: 360deg; Wireless chip model: QCA9533 Supported input voltage; 100V - 240V Dimensions: 50 x 68 x 33mm Operating Temperature: -20°C .. +60°C License Level: 4 Operating System: RouterOS Max Power Consumption: 7W Power Plug Type: Type A (commonly used in USA, Canada, Mexico, Thailand) Product Includes (1) PWR-LINE Access Point (1) User Manual Datasheet Specifications PL6411-2nD CPU QCA9533 CPU nominal frequency 650 MHz PLC chipset QCA6410 Size of RAM 64 MB Memory 16 MB Flash 10/100 Ethernet ports 1 Wireless Built-in 2.4 GHz 802.11b/g/n, dual-chain Wireless regulations Specific frequency range may be limited by country regulations Antenna gain 1.5 dBi Antenna beam width 360° Wireless chip