Delivers Clear Audio

Get crisp, well-balanced sound for music recording or podcasting with the AT2035s large diaphragm. The condenser mic has a smooth 20Hz-20kHz frequency response. It offers an exceptional level of consistent, clean sound quality.

Isolates Background Noise

The cardioid polar pattern reduces the sound pickup from the rear and sides. It helps isolate your desired sound source. So, you can get crystal-clear audio recordings. You can also use the switchable 80Hz High-Pass Filter to decrease the low rumbles.

Can Handle Loud Instruments

Activate the 10dB pad to raise AT2035s maximum SPL handling from 148dB to 158dB. The selectable attenuation pad and wide 136dB dynamic range enable AT2035 to handle loud instruments without overloading.

Hassle-Free Digital Recording

The Blucoil USB Audio Interface features an XLR-1/4" combo (with 48V phantom power) and 1/4" instrument/line inputs. It uses high-quality mic preamps and digital converters to deliver CD-quality 24bit/48kHz resolution across the 20Hz-20kHz frequency range. You can use the bus-powered interface with a laptop and record while traveling.

Easy-to-Use, Easy-to-Monitor

Blucoil employs low-noise preamps to provide the best sound from your mic. The captured audio sounds exactly the way you intended. You can fine-tune your sound while podcasting in real-time. The Clip and Signal indicators inform you when to tweak down the mic/instrument gain or output volume level, preventing audio distortion.

No Audible Delays

Experience zero-latency monitoring with the 1/4" stereo headphone jack. You can closely monitor the mic signal and adjust the levels to prevent distortion or squeals in the recording. The interface also has dual 1/4" TRS main outputs for studio monitors connection. The audio interface is compatible with Mac and Windows.

Stable Support for Microphones

The 30" long Blucoil All-in-One Microphone Boom Arm Stand is designed to free your hands from always holding your microphone during studio recordings, podcasts, or live performances. It is made of heavy-duty steel, zinc-alloyed parts and can be rotated 360°. Easily reposition your mic near your seat or out of the camera view.

*NOTE: Install the boom arm vertically for it to hold up the weight of a 3.3 LB microphone.

Shield Against Plosives and Sibilance

Included with the boom arm is the reliable Blucoil Microphone Pop Filter Windscreen. The 2-layer mesh effectively blocks the air blasted from your mouth. Theres a gap between the layers to disperse any remaining air pressure that passes through the mesh. Its unique design lessens the energy of plosive sounds and prevents hissing or lisping sounds. Youre reassured that the pop filter helps you get cleaner audio recordings.

Clean, Balanced Mic Signals

Whether youre a beginner or pro, youd want crystal clear audio from your microphone. The Blucoil 10-FT Balanced XLR Cable (3-pin male-to-female) ensures efficient signal quality and avoids lost signals. It is made with high-quality oxygen-free copper, 24 AWG wire, and rugged construction metal casting. The high-grade copper prevents degeneration over time, increasing the products life.