[Red]
[Green+H]
[Blue]
[Red+H]
[Green]
[Blue+H]
Features:
Condition:100% Brand New
Color:Black
Light Color: Red/Blue/Green
1-6 Gear display
Fitment:
For Tiger 900 1999-2000
For Tiger 955i 2001-2006
Instructions Guide:
Disclaimer: Do not attempt to install the product if you don?t have basic mechanical skills. If in doubt, please consult with your dealer.
1. Locate the Speed Sensor coupler. The Speed Sensor (Wheel Sensor) is either on the top of the gearbox or at the front wheel. The 3-pole black speed sensor coupler is usually accessible by raising the fuel tank
You need to setup the module after installation. When ignition is turned on, the
display counts backwards (6 to 1) indicating that the memory is clear.
- Raise the rear wheel off the ground by using a stand, and start the
engine in Neutral. (If you do not have a stand, you may setup the unit while
riding. Find a long, straight road with light traffic.)
- The display will blink ?1?. Select first gear, release the clutch, and keep the RPM above idle speed.
The display is blinking faster while the unit is learning the gear.
- When the display shows ?2?, select second gear. Repeat this process until all gears are thought (5 or 6). The unit is programmed and should indicate the gears correctly.
Now, when ignition is turned on, the display counts forward (1 to 6) indicating
that it is fully functional.
Package Include:
1 x Gear Indicator