FEELWORLD has been committed to providing the comprehensive broadcast monitoring and solutions for the professional filmmakers. Whether the upgrade of the excellent display technology from HD to FHD or to UHD 4K resolution, FEELWORLD aims to support the professional creators to obtain the greater benefits and to create more exciting stories, with the most advanced technology to improve the production efficiency.
When you’ve put together rigs made up of powerful equipment, you want to be able to see shots that so much work has now gone into getting to that point. No matter the setup, whether it’s a shoulder rig, gimbal, tripod, or handheld, you need a FEELWORLD monitor for all your setups which allow you to see, in perfect definition, make sure your shot in focus and accurate exposure, what you are shooting so that you know that the shot you are working hard to get is truly stellar.
As a filmmaker you need to pay special attention to the visual aspect in order to capture every moment of emotion. For that reason you can always trust FEELWORLD monitors technology, which allows you to bring your full capacity and creativity taking care of every detail in the most efficient way possible. FEELWORLD monitor helps you to capture those precious moments that you cannot afford to miss.
It’s not easy to evaluate your shot solely through your camera’s built-in monitor, especially if the entire unit is constantly rotating on a gimbal/ stabilizer, the camera on crane rig jib, One of the biggest issues when you are doing low-angle/ high angle shot is monitoring what you’re shooting. FEELWORLD monitor is ideal tool for you to monitor the scene since you can install it where you can conveniently see it.
With its 2600 cd/m2 bright backlight, this makes it easy to see outdoors without a hood, making it easy for outdoor shooting in bright daylight!. LUT6S can meet indoor and outdoor environmental monitoring. LUT6S has touch screen and 3D LUT, with 1920x1080 resolution, impressive 368 PPI, Rec.709 professional color calibration to provide a sharp image, ideal for focus pulling and image analysis on set and in the field. Includes 4K HDMI and 3G-SDI interface, it can be use tilt arm for attaching it to cameras and rigs. Built in Sony F970 battery plates.
Sony F970, F960, F950,F930, F770, F750, F730, F570, F550, F530, QM91D, QM91, QM90D, QM90, QM71D, QM71, QM70D, QM70, QM51D, QM51, FM71, FM70 series.
(Note battery not include, need purchase sperate)
Since the LUT6 is the ultra bright, so its high Consumption: ≤16W. So choose a larger battery capacity can be used for a longer period of time, the Sony F970 can use about 3 hours.
1. Cant turn on the monitor
Make sure to use the standard 12V 3A power adapter to connect the monitor. If power is supplied by F970 battery, please check if the F970 battery is fully charged.
2.Have noise during recording
Long press “<“ button and turn down volume to near zero, can aviod have not nosie during recording. Long press ">" is increase the volume.
3.The monitor display " no signal"
1)Try another HDMI cable.
2)And please try to connect monitor HDMI to your computer, try if the monitor have signal?
3)Change the camera output singal, confirm the monitor input signal whether support the camera output signal.
4.When you turn on the focus peak, the information on the monitor will also display the focus peak and other problems. You can try to turn off the "HDMI Information Display" under the "HDMI Settings" tab in the menu system, so that when the focus is turned on, it will not A similar situation occurred.
1. SD card format: Support for FAT32 and NTFS.
2. The number of imported files is limited: Up to 50 user files can be imported.
3. Document requirements: LUT file format suffix is .cube (case insensitive). A single file must not exceed 7.9M. Supports files with LUT_3D_SIZE of 16, 17, 32, 33, 64, 65. Meet the above requirements as a valid document. The LUT file name is required to be in English or numeric to avoid unrecognized, resulting in incorrect file names.
4. Import steps and instructions
Make sure the SD card is inserted correctly. Enter the [Color] item in the menu main menu and select the [Import LUT (SD)] item, and then execute the item.
The system will first recognize the SD card.
(1) No SD card recognized: Will prompt "access failed", you can try again at this time, if not, you can restart the device to try once.
(2) Identify the SD card.
· The system will erase the user files that already exist in the device and prompt "initialize". If there is no valid file in the SD card, it will not be imported, it will prompt "Empty" and end this operation. If there is a valid file in the SD card, the file will be saved to the device and the message "[n]name" will be prompted, where n indicates that the nth is currently stored (n is not greater than 50), and the name is currently imported. LUT file name.
When the import is completed, it will prompt "Success [n]", and the operation will end. n indicates the number of imports.
|
|
|
---|---|---|
Accurate waveform monitoringWhen you need to analyze image quality more accurately than simply looking at the picture then use LUT6Ss built in waveform monitoring! Choose from waveform (RGB Parade, YUV Parade, Y Parade), vectorscope, histogram and audio phase and level displays, and get broadcast accurate waveform monitoring that shows everything you need to know technically about your video and audio signals. The functions can be opened separately, and also support one key to open all scope mode. LUT6S is perfect for live production monitoring and removes the need for separate expensive scopes! |
Peaking Focus AssistThe Peaking Filter is used to aid the camera operator in obtaining the sharpest possible picture. When activated, the internal processor will display a colored highlight on the screen where sharp edges appear. You can switch the peaking color between yellow, red, green, blue, white according to different tone of the subject. The focus level can be adjusted from 1 to 10 levels. |
True Color · Professional Color CalibrationUse Rec.709 color standard FEELWORLD uses the professional Rec.709 HD color standard, and uses the color calibration technology, with the professional instrument calibration at the factory, it can achieve monitor calibration efficiently and get accurate color reproduction easily, do not distort the color, show the real image when you shooting video. |
Screen Size: 6" IPS
Resolution: 1920x1080 pixels
Pixel Pitch: 0.069 (L) x 0.069 (W) (mm)
Aspect Ratio: 16:9
Brightness: 2600cd/m²
Contrast Ratio: 1000:1
Backlight: LED
Viewing Angle: 80°/80°(L/R) 80°/80°(U/D)
Input: 1 X 3G-SDI, 1 X HDMI
Output: 1 X 3G-SDI, 1 X HDMI, 1 X DC Barrel (3.5mm outer, 1.1mm inner) Audio: 3.5mm Stereo Headphone
Input Voltage: DC7~24V
Power Consumption: ≤16W
Working Temperature: -20°C~50°C
Storage Temperature: -30°C~60°C
Install Way: 1/4"-20 Thread Socket (Right, Bottom)
Battery Plate: F970 Battery Plate
Unit Size: 162Lx93.2Hx29D (mm)
Unit Weight: 300g
SDI Output Support Format:
720p (60/59.94/50/30/29.97/25/24/23.98); 1080i(60/59.94/50); 1080p (60/59.94/50/30/29.97/25/24/23.98)
SDI Input:
720p (60/59.94/50/30/29.97/25/24/23.98); 1080i(60/59.94/50); 1080p (60/59.94/50/30/29.97/25/24/23.98); 2048x1080i (60/59.94/50); 2048x1080p (60/59.94/50/30/29.97/25/24/23.98)
HDMI Input/ Output:
480i/576i/480p/576p; 1080i (60/59.94/50); 720p (60/59.94/50/30/29.97/25/24/23.98); 1080p (60/59.94/50/30/29.97/25/24/23.98); 3840x2160p (30/29.97/25/24/23.98); 4096×2160p (30/29.97/25/24/23.98)
![]() |
![]() |
![]() |
![]() |
![]() |
![]() |
|
---|---|---|---|---|---|---|
FEELWORLD FW568 V2 5.5 inch DSLR Camera Field Monitor with Waveform LUTs 4K HDMI | FEELWORLD LUT5 5.5 Inch 3000nits Ultra Bright DSLR Camera Field Monitor | FEELWORLD FT6 FR6 5.5 Inch Wireless Video Transmission DSLR Camera Field Monitor | FEELWORLD LUT7S 7 Inch 2200nit Touchscreen Monitor with 3D Lut 4K-HDMI 3G-SDI | SEETEC P133-9HSD 13.3 Inch SDI Broadcast LCD Director Studio Production Monitor | LAIZESKE W1000S Wireless Video Transmission System SDI Dual HDMI 1000FT 0.08S | |
Screen Size | 5.5" IPS | 5.5" Touch Screen | 5.5" Touch Screen | 7" Touch Screen | 13.3" IPS | OLED Screen |
Resolution | 1920x1152 pixels | 1920x1080 pixels | 1920x1080 pixels | 1920x1200 pixels | 1920x1080 pixels | |
Aspect Ratio | 16:9 | 16:9 | 16:9 | 16:10 | 16:9 | |
Brightness | 500cd/m² | 3000cd/m² | 500cd/m² (Light Sensor) | 2200cd/m² | 400cd/m² | |
Contrast | 1000:1 | 1000:1 | 1000:1 | 1200:1 | 1000:1 | |
Inputs | HDMI | HDMI | HDMI | 3G-SDI, 4K-HDMI, SD Card | 3G-SDI, HDMI, YPbPr, DVI-I, Video, Audio(L/R) | 3G-SDI HDMI |
Outputs | HDMI, Stereo Headphone, DC OUT 8.4V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera) | HDMI, DC OUT 8V, Stereo Headphone | HDMI, Stereo Headphone, DC OUT 8V, Barrel (5.5mm outer, 2.1mm inner; Power DSLR or mirrorless camera) | 3G-SDI, 4K-HDMI, DC OUT 8.4V, Stereo Headphone | 3G-SDI, HDMI, YPbPr, Video, Stereo Headphone, Speaker(built-in) | 3G-SDI, HDMI |
Features | 3D LUT, Waveform, Histogram, Peaking Focus Assist, False Colors, Zebra Exposure, Nine Grid, Scan Mode, Zoom, Anamorphic Mode, Pixel to Pixel, Center Marker, Safe Area, Ratio marker, Marker Color, Check Field, Image Flip, Image Freeze, Zoom All | 3D LUT, HDR, Waveform, Vector Scope, RGB Histogram, Peaking Focus Assist, False Colors, Zebra Exposure, Scan Mode, Zoom, Anamorphic Mode, Pixel to Pixel, Nine Grid, Center Marker, Safety Marker, Ratio Marker, Check Field, Image Flip | 3D LUT, HDR, All Waves display, Parada, Vector, Histogram, Focus assist, False color | 3D LUT, Waveform, Vector Scope, RGB Histogram, Peaking Focus Assist, False Colors, Zebra Exposure, Scan Mode, Zoom, Anamorphic Mode, Pixel to Pixel, Nine Grid, Center Marker, Safety Marker, Ratio Marker, Check Field, Image Flip | Peaking Focus Assist, Check Field, Camera Mode, Pixel to Pixel, Center Marker, Safe Marker, Image Flip, Image Freeze, Zoom All, U/D & L/R Zoom | 1000ft transmission range, 0.08S low latency, support 1080P@60Hz, Wireless full-duplex talkback, transmitter can be switched as a receiver, One TX to multiple RX, APP monitoring for Android/iOS, 13 frequency channels, AUTO channel scan |
Unit Size | 142Lx87.2Hx27.5D (mm) | 142Lx86Hx28D(mm) | 148Lx103.5Hx41W (mm) | 190Lx126Hx27D (mm) | 315.5L×231H×26.4D mm (W/O Bracket) | 67L*24W*118H (excluding antenna) |
Unit Weight | 175g | 270g | 370g | 460g | 1.64kg (W/O Bracket)/ 1.96kg (W/Bracket) | 128g (One Unit) |