Feature
●Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge. Put the gauge in the hole. Using M4 nut and C type bracket to seal up the gauge.
●For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
●It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it.
●It shows current speed and course(not odometer and trip meter).
●Red Backlight, 9-32VDC(12VDC/24VDC) Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection
[15Knots-Black+Black]
[35Knots-Black+Stainless Steel]
[70Knots-White+Stainless Steel]
[15Knots-Black+Stainless Steel]
[35Knots-White+Stainless Steel]
[70Knots-Black+Stainless Steel]
[15Knots-White+Stainless Steel]
[70Knots-Black+Black]
[35Knots-Black+Black]
Description
Product Features:
-Suitable for all vessels, boats, yachts, etc..
-The signal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision, quick location confirmation and short start up time.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
Product Introduction
|
|
|
|
|---|---|---|
How to connect wires?Red wire --- Power Positive. Orange wire (backlight) --- Power Positive. Blue wire --- Power negative. Please note: Speedometer can be connected to 12VDC and 24VDC power directly. |
Why does LCD show Err?- Turn on supply power after installation. - Then the meter starts to search for signal and LCD will count automatically. - If there is still no signal when LCD counts to 300. the LCD displays "Err". |
GPS Speedometer keeps counting?- After installation in the first time, GPS speedometer needs to search for signal, thats the reason that LCD counts numbers all the time. - After getting signal, LCD will come back to 0. It is normal. |
How to install it?
- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 70mm (2 3/4”) behind the panel to fit the gauge.
- Put the gauge in the hole.
- Using M4 nut and C type bracket to seal up the gauge.
- For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
|
|
|
|
|
|---|---|---|---|---|
| 999(MPH, Knots, KM/H adjustable) | 15knots 28km/h | 15Knots 17MPH | 999(MPH, Knots, KM/H adjustable) | |
| size | 85mm | 85mm | 85mm | 85mm |
| color | white+stainless steel | black+stainless steel | white+stainless steel | white+stainless steel |
| Indicating Range | 0-999(MPH, Knots, KM/H adjustable) | 0-15knots(0-28km/h) | 0-15Knots 0-17MPH | 0-999(MPH, Knots, KM/H adjustable) |
| adjustable odometer | no | no | no | no |
| Type | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer |
Package Includes:
1x GPS speedometer
1x GPS Speed Sensor
1x Multi-plug socket
1x Installation Instruction