Feature
●Compatibility: 2010-2021 4Runner, 2005-2021 Avalon, 2007-2021 Camry, 2010-2014 Fj Cruiser, 2008-2021 Highlander, 2006-2021 RAV4, 2006-2020 Sienna, 2016-2021 Tacoma, 2007-2021 Tundra, 2009-2016 Venza, 2013-2018 ES300h, 2007-2021 ES350, 2007-2017 LS460, 2006-2006 RX330, 2007-2021 RX350, 2010-2021 RX450h
●Superior Raw Material: Our oil filter housing assembly fabricated by high standard aluminum material to make sure the structure meets or exceeds the genuine products
●Perfect Fitting: Precise moulds and designing ensure our oil filter housing cap fits cars accurately
●Trustworthy Quality: Undergone extensive testing to ensure a quality fit and long service life
●Replacement OEM parts: 15620-31060 1562031060 15643-31050 917-016
Description
KOOPATZ Oil Filter Housing Cap with plug replacement for Toyota Avalon Camry Highlander Tacoma Rav4 Sienna Venza 15620-31060
Replacement OEM Numbers:
15620-31060
1562031060
15643-31050
1564331050
Installation Instructions:
How to install oil filter cap?
1. Clean the inside of the oil filter cap assembly, its thread and O-ring groove.
2. Apply a small amount of engine oil to a new O-ring and intall it to the oil filter cap assebmly.
3. Set a new oil filter element in the oil filter cap assembly.
4. Remove any dirt or foreign matter from the installation surface of the engine.
5. Apply a small amount of engine oil to the O-ring again, Align the cutout in the oil filter cap assembly thread 90° to the grooves in the oil filter bracket and temporarily tighten the oil filter cap assembly.
When the oil filter cap should be replaced?
If the oil filter housing housing cap is impacted or cracked, or if the mounting surface is warped, engine oil will lead and the oil filter cover should be replaced.
Notice
- Be sure to install the O-ring to the proper position, otherwise engine oil may leak.
- Do not twist the O-ring.
- Make sure that the O-ring does not get caught between the parts.
- After tightening oil filter cap assembly make sure there is not gap and O ring is not protruding.
- Do not remove the oil filter bracket clip when installing the oil filter cap assembly.
- Do not cross thread the oil filter cap assembly.