Feature
●Pressure transducer/sender/sensor 200 psi stainless steel for oil,fuel,air,water; 200 psi Pressure transducer/sender/sensor/Transmitter for oil/fuel/air/water; 200 psi oil/fuel/air/water Pressure transducer/sender/sensor/Transmitter Pressure Range: 0-200 psi, works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
●Output: 0.5V?4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V
●Package include: 1 pcs x200 psi pressure transducer
●Pressure Medium: The gas and liquid which is compatible with 316L stainless steel; Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC61000-4-3;
●Please check the sensor before use: connect the 5V power to the sensor power supply, the multimeter modulates the voltage level, the red pen connects to the green wire, and the black pen connects to the black wire. The sampled voltage value tends to stabilize, then the sensor has no problem.
Description
About AUTEX
AUTEX is one of the largest AUTOMOTIVE SENSORS manufacturer in the auto parts aftermarket.
AUTEX can offer an extensive line of High-quality ready to install kinds of AUTOMOTIVE SENSORS.
AUTEX will continue to research and discover, manufacturing, supply and distribution of our products that ultimately delivers value to customers and society.
Fitment
Pressure Range: 0-200 psi
Material :Stainless steel
Output: 0.5V - 4.5V linear voltage output. 0 psi outputs 0.5V, 100 psi outputs 2.5V, 200 psi outputs 4.5V
Working Temperature: -40?+125ºC;.
Works for oil, fuel, water or air pressure. Can be used in oil tank, gas tank, etc.
Accuracy: ±1%FS;
Thread: 1/8-27 NPT.
Overload Capacity: 2 times;
Pressure Medium: The gas and liquid which is compatible with 316L stainless steel;
Load Resistance: ≤(supply power-6.5V/0.02A)Ω¸;
Long-term stability: ± 0.2%FS/year;
Temperature Effect on Zero: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;
Temperature Effect on Sensitivity: Typical: ±0.02%FS/ºC; Maximum: ±0.05%FS/ºC;
Shock Resistance: 100g;
Anti-Shock: ≤±0.01%FS(X,Y,Z axes, 200Hz/g);
Response Time: ≤1ms;
Insulation Resistance: >100mΩ¸ 500VDC;
Explosion-proof Class: ExiaTTCT6;
Electromagnetism Compatibility: EN50081-1; EN50082-2; IEC61000-4-3;
Wiring connector: water sealed quick disconnect. Mating connector and wire harness (pigtail) is included.
Wiring: Red for Output. Black for Vdd. Green for GND.
It is an advance pressure sender than traditional mechanical pressure sender.
Package include:
1 pcs x200 psi pressure transducer
How to replace with new automotive sensor?
Kindly note that:
Like anything else, sensors wear out, corrode, or become dirty. This essentially blinds the computer and triggers the terrible check engine light. You can purchase or prepare a code reader and read your OBD codes, that will help you a lot on installation.
Either way, you should always consult a repair manual before attempting any procedure involving automotive sensors. If you’re servicing a vehicle built before 1996, youll need a code reader that reads OBD I information. Post 1996, youll need a code reader capable of OBD II diagnostics.
1) Always wear eye protection and start with installation tools.
2) Searching related installation video on the internet will be recommended.
AUTEXs AUTOMOTIVE SENSORS
- Not remanufactured or rebuilt.
- High Quality Replacement Part.
- Exact Fit for easy installation.
- 100% Brand New and tested prior to leaving the factory.
- High Quality requestment
- High Output
- Exact Fit
After Replaced with AUTEX:
- AUTOMOTIVE SENSORS working more stable when you driving.
- Enjoying!
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 100 Psi Pressure Sender | 150 Psi Pressure Sender | 200 Psi Pressure Sender | Dodge Jeep Oil Pressure Sensor | Chevrolet GMC Oil Pressure Sensor | Nissan Oil Pressure Sensor | |
| Part Number | 100 Psi | 150 Psi | 200 Psi | 5149062AA | PS417 | 12673134 |
| Fit for | Oil Fuel Air Water Diesel Gas | Oil Fuel Air Water Diesel Gas | Oil Fuel Air Water Diesel Gas | Dodge Jeep Chrysler RAM | Chevrolet GMC | Nissan |