Feature

●Suitable for laser machine of engraving area 300 x 400mm and 300 x 500mm.

[Simple Type Rotary Axis]




[60W Standard Version |  Orange]




[60W Upgraded Version + Rotary]




[50W Standard Version |  Gray]




[60W Standard Version |  Gray]




[40W Upgraded Version]




[40W Standard Version |  Orange]




[50W Upgraded Version + Rotary]




[60W Upgraded Version]




[50W Upgraded Version]




[40W Standard Version |  Gray]




[40W Upgrade Version + Rotary]





Description

Notice:For this rotary axis, the height of it is 5cm, so Applicable machine lifting height must be higher than 5cm. Please pay attention to your machine installation space when ordering.
This one is installed in the laser engraving machine, and used for engraving the materials barrel rolling platform .

LASER ROTRAYDEVICE GUIDE
Step 1, Please first put rotary device on Engraving machine workbench, adjust the proper height, also adjust the laser focus distance from laser head to object.
Step 2, Turn on power of laser machine, and Laser head will automatically go back to origin. find the rotary connect port and switch on the right of the machines engrave area, then connect the rotary device here at this port, then turn on the rotary switch. (Please strictly follow the steps, first turn on the machine to finish the machines self-test, then turn on the rotary axis switch. If the steps are reversed, the rotary axis will continuously rotate without stopping.)
Step 3, Open the software and import the files. Then click on Icon button (engrave) for further engraving settings. Select Rotary. Click on the Fixture then setting, select simple fixture.
Step 4, Then manually move the laser head to the top of object which will be engraved on (Move laser head using plugin CorelLASER setting).
Step 5, Position object, adjust focus distance, then click on Icon button (engrave) will be okay.