Feature
●Package Incluede: bead end cap knot cover, brass wire guardians, crimp beads knot covers, tube crimp beads. 5 Colors: platinum, gunmetal, silver, golden, antique bronze.
●Brass Tube Crimp Beads--- 2mm in diameter, 2mm long, hole: 1.5mm, 100pcs/color, 500/box. They are used with all beading wire to secure the start and finish of the strand. Thread through the crimp bead, around the clasp loop, back through the crimp bead and draw the beading wire taut.
●Iron Bead End Caps: 8x4mm, hole: 1.5mm, 3mm inner diameter, 50pcs/color, 250pcs. Used to cover the knots on the end of thread or wires to join to a clasp.
●Brass Wire Cable Protector: 5x6x2mm, hole: 1.5mm, 50pcs/color, 250pcs. Simply put your crimp on your Tiger tail first then feed your wire up one side of the guardian, then down the other side and back through your crimps. Pull your crimps up and squash as normal.
●Brass Open Crimp Beads Knot Cover--- 4mm in diameter, 3mm wide, hole: 1.5mm, 50pcs/color, 250pcs. Open on one side allowing them to slip over the crimp tube, can fit over the crimped bead or tube.
[1250Pcs & Box-Beading Supplies]
Description
- Tube Crimp Beads--- 2mm in diameter, 2mm long, hole: 1.5mm
- Bead End Caps: 8x4mm, hole: 1.5mm, 3mm inner diameter
- Wire Cable Protector: 5x6x2mm, hole: 1.5mm
- Crimp Beads Knot Cover: 4mm in diameter, 3mm wide, hole: 1.5mm
Brass Tube Crimp Beads & Crimp Beads Knot Covers & Wire Guardians & Iron Bead Tips Knot Covers for Jewelry Making
Beading Supplies
- Tube Crimp Beads
- Open Half Rond Crimp Beads Knot Cover
- Bead Tips
- Wire Guardian
Crimp beads covers can match with bead tips to secure the start and finish of the strand beading wire/cord. Wire guardians are the perfect finishing end for the use with Tiger Tail or other jewelry beading wire to prevent breakages occurring at the pressure point formed when doing the final crimping.
- 5 Colors
- Strong Metal
How To Use?
|
|
|
|
|---|---|---|
|
Bead Tips Cover the end knots on your jewelry thread or cord and fasten your cord to a jump ring or clasp with these calmshell bead tips! |
Crimp Beads & Wire Guardian Simply thread the wire through tube crimp beads and wire guardian, then use flat-nose pliers to squeeze your crimp tubes. Finally use round nose pliers to close the half round crimp bead to create a finished cord end. |
Tube Crimp Beads False & Correct Sample for usage of tube crimp beads |
Warm Tips:
- Its important to use the right tools to work with these crimp beads supplies.
- Please see our Pliers Set for crimping inspiration.