Feature
●[Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project
●[Interface type] This SG90 servo is compatible with JR & Futaba interface
●[Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees
●[Stalling torque] 17.5oz/in (1kg/cm); Dead zone width: 7 microseconds; Amplifier type: analog controller; Working voltage: 4.8V～6.0V
●[Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally
[MG90S]
[SG90]
Description
Mechanical Specification:
●Limit angle: 200°± 1°
●Weight: 9 ± 1 g
●Connector wire gauge: ＃28 PVC
●Connector wire length: 250 ± 5 mm
●Spline: 21T
●Horn type: Cross,star and bar-type
●Excessive play: ≤0.5°
Control Specification:
●Control system: Change the pulse width
●Amplifier type: Analog controller
●Operating trave: l120°±10° (900→2100 μsec)
●Left&Right travelling Angle deviation: ≤ 6°
●Centering deviation: ≤ 1°
●Neutral position: 1500 μsec
●Dead band width: 7 μsec
●Rotating direction: Counter Clockwise (900→2100μsec)
●Pulse width range: 900→2100 μsec
●Maximum travel: About 120° (900→2100 μsec)
Wire Layout:
●Electrical Specification (Function of the Performance): Operating
●speed (at no load):
0.09±0.01 sec/60°(4.8V ) 0.08±0.01 sec/60°(6V)
●Running current (at no load): 400±30mA (4.8V ) 500±30mA(6V)
●Stall torque (at locked): 2.0±0.20kg·cm (4.8V ) 2.2±0.20kg·cm(6V)
●Stall current (at locked): 1300±40mA (4.8V ) 1600±50mA(6v)
●Idle current (at stopped): 6±1mA (4.8V ) 6±1mA(6v)
●Running life(at no load): >350000 Turns(4.8V ) >320000 Turns(4.8V )
Package include:
10 x SG90 9G servo motor
1 x 20cm female-male jumper wire