Type: Three-Way
Impedance (Ohms): 8
Crossover Point (Hz): 750/5,000
Woofer Impedance (Ohms): 4/8
Rated AES Power Handling ? RMS (Watts): 450
Program Power (Watts): 900
HF Attenuation (dB): 0/4
Midrange Attenuation (dB): 0/4/7
Octave (dB): 12
Our crossovers offer some unique selectable futures:
WOOFER IMPEDANCE SELECTION
This setting allows the same crossover to be used with 8 or 4 Ohms speakers and combinations of them (series or parallel connection) providing you with one solution for multiple cabinet variations.
WOOFER ROLL-OFF CROSSOVER ADJUSTMENT
Some woofers respond excessively at the cut-off frequency than others and need 12 dB/octave filters, where other woofers have a natural roll-off at or near the crossover point and work well with 6 dB/octave filters. We give you the ability to select this on two of our crossovers: the 2DF1800 two-way crossover and the 3DF400/1800 three-way crossover.
SPEAKER ATTENUATION
Match the output level of the different speakers in your cabinet with the setting; it helps in creating a seamless transition from high to mid to low-especially useful for when driver sensitivities do not match.
BRIGHTNESS ADJUSTMENT
Many large-format compression drivers naturally roll off above 10 kHz. Our brightness adjustment offsets this phenomenon, applying attenuation below 6 kHz and increasing the energy at high frequencies for more brightness and definition.
All crossovers are factory-set with these adjustments in their conventional position, for quick installation and use, but with a little testing and experimentation, we believe that the final sound of your speaker will sound that much better!