Feature(may vary by option.)

●Third brake lights are compatible with 2009-2014 Ford F150 trucks without ramp control. Refer to Oem Part number :AL3Z13A613E, FO20890104
●Not only provides a cool look and excellent lighting, but also increased safety and high recognition. Long-lasting light output performance thanks to high durability new material with UV coating.
●The fully sealed waterproof structure design can make our Brake Lights well prevents water vapor from entering in any harsh environment such as rain, snow, wind and sand
●What do you get? - 1 X 3rd brake light.
●The 3rd brake light cargo lamp is no more drilling needed. Hand screw tool is better for the installation. The factory screws could be used on this brake lamp.

[Smoke Lens Black Housing X-Type]




[Clear Lens Black Housing]




[Clear  & Red Lens Black Housing]




[Smoke Lens Black Housing I-Type]




[Smoke Lens Black Housing UI-Type]




[Clear Lens Black Housing (09-14)]




[Clear Lens Black Housing UI-Type]




[Smoke Lens Black Housing Basic-Type]




[Black Housing Clear Lens]




[Clear Lens Chrome Housing UI-Type]




[Clear Lens Chrome Housing]





Description

VRVR
brake lightbrake light

GRAND ORANGE 3RD Brake Light Specification:

  • Vehicle Fitment: Compatible with 2009-2014 Ford F150
  • Interchange Part Number: 923-236 AL3Z13A613E, FO20890104.
  • Light Source: LED
  • Position: Rear
  • Voltage: 12V

GRAND ORANGE 3RD BRAKE LIGHT

11

11

11

Brighter & Safer

  • The unique design makes the GRAND ORANGE 3rd brake light has excellent transparency and reflectivity, making the light brighter and farther and improving the safety of the driver and passengers.

Sealed Design & Multi-Purpose

  • GRAND ORANGE 3rd brake light has sealed structure, which prevents moisture and work well in any bad weather.

Easy To Install

  • Plug and Play. Direct fog lights replacement. Just need 10-15 minutes to finish the installation.

Remarks

A small amount of water vapor may be generated

1. Large temperature difference leads to condensation of water vapor inside and outside the lampshade.

2. In low pressure areas, water vapor is easy to accumulate and condense in winter.

How to solve the water vapor problem:

1. Check whether the air vent is blocked. Turn on the low beam for about 20 minutes, and check whether the air vent is blocked, so that the water vapor cannot be discharged normally.

2. Take out the lamp bulb and wipe the inside dry before putting it back.

3. Put the silica gel desiccant into the shell for moisture absorption treatment.

Product information