Self-Programmable Remote Car Key Replacement
An inexpensive replacement for your original remote key fob, the Keyless2Go car key replacement is self-programmable for vehicles up to 2010* and comes with easy do-it-yourself instructions to help you program your new car key at home. Enjoy keyless entry on a wide variety of vehicles from Buick, Chevrolet, GMC, and Cadillac. Each fob key has been pre-tested to ensure fitment and that signals are transmitting properly. Every remote key fob comes complete with batteries and access to tech support to help get your new smart key working.
Compatible with:
2008-2016 Buick Enclave
2007-2010 Cadillac Escalade
2007-2015 Chevrolet Avalanche
2012-2015 Chevrolet Captiva Sport
2007-2009 Chevrolet Equinox
2008-2021 Chevrolet Express
2007-2013 Chevrolet Silverado
2007-2014 Chevrolet Suburban
2007-2014 Chevrolet Tahoe
2009-2017 Chevrolet Traverse
2007-2016 GMC Acadia
2008-2019 GMC Savana
2007-2013 GMC Sierra
2007-2014 GMC Yukon
2007-2009 Pontiac Torrent
2007-2010 Saturn Outlook
2007-2009 Suzuki XL-7
2008-2010 Saturn Vue
2008-2009 Hummer H2
How to Program your Keyless2Go Key Fob Replacement (Up To 2010*):
Option 1 (for vehicles with the Driver Information Center)
1.Insert key and switch the ignition ON (just shy of starting vehicle without cranking engine)
2. Press vehicle information button until PRESS TO RELEARN REMOTE KEY is displayed.
3. Press the set/reset button (button will have a checkmark) until REMOTE KEY LEARNING ACTIVE is displayed. Vehicle is nowin programming mode.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal willbe heard indicating successful programming.
5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALLremotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
Option 2 (for vehicles without the Driver Information Center)
1. Insert key into the ignition and turn to ON (Just shy of starting vehicle without cranking engine).
2. Press the trip odometer reset button until RELEARN REMOTE KEY is displayed.
3. Press and hold the trip odometer reset button for approximately 3 seconds until REMOTE KEY LEARNING ACTIVE displays.
4. Press and hold LOCK and UNLOCK buttons at the same time on first remote for approximately 15 seconds. An acoustic signal willbe heard indicating successful programming.
5. Repeat step 4. to program additional remotes. You can have up to 8 programmed remotes for this vehicle. You must program ALLremotes including existing remotes.
6. To exit programming mode turn ignition OFF, remove key and test all remotes.
*2011 - up Vehicles must be programmed by a locksmith or dealership.