Feature
●?? High-quality materials: This aquarium light is made of high-quality plastic, aluminum alloy and stainless steel bracket. Designed for reliable and long-term performance. Color Temperature: 6500K; 93 LEDs (50White + 12 Blue + 6 Red + 6 Green + 19 RGB)
●?? Multiple modes: with timer function and dimmer function, including day and night mode. High brightness and high color temperature. It can effectively stimulate plant photosynthesis and increase survival rate. High efficiency and low energy consumption.
●?? Easy installatin- The ergonomic design makes light installation easy. Just place the fish tank light on top of the fish tank, adjust the length of the bracket to fit the fish tank, and connect the power cord.Extendable brakets allows this LED light to fit most aquairum fish tanks 45-60cm/18-23.6 inches wide.Before use, please remove the protective film.
●?? The ultra-thin aluminum alloy shell design ensures fast and uniform heat dissipation, and the SMD5050 LED chip brightness is increased by 20%, which can provide reliable long-term performance, energy saving and safety. Explosion-proof acrylic glass provides clearer and safer lighting for your aquarium.
●?? Full-spectrum LED arrays are good for plant, reptile, reef, coral or seaweed growth. Gorgeous multi-colored LED lights add extra light to show off your aquatic plants, corals or incredible fish. Night vision works great.
[45cm with Timer]
[120cm without Timer]
Description
- Multicolor full spectrum LED light.
- High efficiency, low power consumption and cost saving.
- The aluminum alloy plastic shell is more durable than plastic.
- Recommended for freshwater aquariums or seawater aquariums.
Specification
Length: 45cm
Power: 24W
CRI/Ra: 89
Color temperature: 6000-10000K
Housing material: Aluminum + Plastic
RGB-LED: White: 50 pieces; Red: 6 pieces; Green: 6 pieces; Blue: 12 pieces; RGB: 19 pieces; Total: 93 pieces.
Power supply of the adapter: input-AC 100-240V, output-DC 15V.
Can be used for aquarium sizes: 45-60 cm/17-23 inches
|
|
|
|
|---|---|---|
|
In "DIY mode", you can use eight time periods to create your own custom 24-hour light cycle, adjusting the "on/off" and light intensity for each time period. DIY mode is full-spectrum. You cant choose colors, you can only change the brightness of certain time periods. After you finish setting up DIY mode, please remember to reset the local time to activate the DIY settings. |
In daylight and moonlight modes, it can be programmed to cycle in a color gradient. In daylight time period mode, the full spectrum illumination is automatically turned on. 10 brightness levels: 10%-100%, the brightness set to 00 will turn off completely after 15 minutes. Only one brightness can be set in each time period, and the start and end times of this time period are set by yourself. |
With the default auto cycle, you can use the daylight and moonlight options to create your own 24-hour light cycle, change the auto on/off time, and adjust the light color and intensity for the moonlight option. Preset lighting automatically turns on at 6:30 am and off at 23:30 pm. The lights can be set to turn on and off at specified times, which allows your fish to get some rest at night. |
|
|
|
|
|---|---|---|
Excellent Heat DissipationHigh-quality, fully sealed thick aluminum foil provides more efficient heat transfer and protects the device from moisture and water. |
Adjustable BracketThe adjustable bracket can be flexibly adapted to the length of the fish tank. The single-sided bracket of this fish tank light can be stretched 12 cm. |
Silicone Sealed Lamp BeadsAll beads are sealed using silicone, so you dont have to worry about moisture inside the lampshade, or water splashing onto the body of the lamp. |
User-defined DIY mode, the aquarium light can be adjusted to simulate various periods of the day
You can set different brightness settings within 8 time periods according to your preference. When this setting is turned on, the two timing functions of DAY-L and MOON-L will be automatically turned off. When this setting is set to OFF, there are two sets of DAY-L and MOON-L. Timing function is turned on automatically.
How to set DIY Mode:
In the time mode, press and hold the SET and LIGHT keys simultaneously for more than 3 seconds to enter this mode.
At this time, ON/OFF flashes. ON is to turn on this mode. OFF is off. Press the UP/DOWN button to select.
Press the SET button to enter the brightness setting of L1,Press the UP/DOWN button to adjust the brightness. 10 is 10% brightness. Press the SET button again to enter the on time of L1. The hour in the DAY-L position flashes. Press the UP/DOWN button to make adjustments. Press the SET button once to enter minute adjustrnent. Press the UP/DOWN buttons to make adjustments. Press the SET button again to enter the end setting of L.
The hour in the MOON-L position flashes. Press the SET button to enter the minute adjustment, press the UP/DOWN button to adjust, and then press the SET button to enter the brightness setting of L2. Press the UP/DOWN button to adjust the brightness, which can be adjusted according to the brightness timing setting of the L1 L2-L8 period.
How to set the DAY-LIGHT on and off time
In the normal time mode, press SET KEY once to enter the time setting mode of the DAY LIGHT light on and off.
At this time, DAY-L ON in the DAY-L light ON/OFF timer area is flashing, and the setting is DAY-LIGHT (daylight) time, press and hold SET KEY for 3 seconds, enter the ON hour setting, press the UP/DOWN key to adjust the hour, press SET KEY once to enter the minute adjustment, the minute position is flashing, press UP/DOWN key to adjust Press SET KEY again to enter OFF time setting. At this time, DAY-L OFF and hour are flashing. Press UP/DOWN to adjust the hour. Press SET KEY to enter minute adjustment. Press UP/DOWN to adjust , Press once to exit the setting.(DAY-LIGHT light is for all lights)
How to set the MOON-LIGHT on and off time
First select the color you want the night light to light on. Press the LIGHT key to select 7 colored lights. After the light is set, set the night light ON/OFF time. This light is the light of MOON-LIGHT. When the light is not on or white, the default is blue.
In the normal time mode, press the SET button once to enter the DAY-LIGHT mode, and press the SET button again to enter the MOON-LIGHT mode. At this time, MOON-L ON is flashing. Press and hold the SET button for more than 3 seconds to enter the time when the luminous light is turned on. At this time, the hour is flashing. Press the UP/DOWN button to adjust. Press the SET button once to enter the minute adjustment. Press the SET button once to enter the setting of the MOON-LIGH OFF (the night light timer is off). At this time, the MOON-L OFF is flashing. Press the UP/DOWN button to adjust the OFF hour. UP/DOWN key to adjust OFF minute, press SET key again to exit setting.
