Feature

●This timer features three modes, 15-minute and 30-minute ramp up/dim down and straight on/off function
●Support up to 6 separate programming time points
●Can also be used as a dimmer, it can adjust the brightness from 1 ? 100%
●Internal memory stores your pre-programmed settings in case of power failure
●Suitable for NICREW ClassicLED, ClassicLED Plus, BrightLED, SkyLED and other lights with standard 2.5mm/2.1mm power connectors

[Single Channel Timer Pro]

Description

LED Light Timer

Customize your lights with more features, including a sunrise/sunset mode that simulates sunrise and sunset in your aquarium, providing your animals with a natural lighting cycle while helping to reduce stress and promote natural behaviors.

Single Channel Timer PRO

The gradual ramp-up and dim-down features simulate a natural sunrise and sunset each day to prevent stressful light shock experienced when aquariums transition from complete darkness to full brightness. The manual button allows you to turn your lights on or off instantly.

Straight on and off
Adjust light intensity
15-minute or 30-minute sunrise and sunset
6 different programming blocks
Easy to operate with a large LCD display
Lighting schedule saved in case of a power outage

Frequently Asked Questions

1. What is the most common size of the DC connector?

The most common sizes are 2.1mm and 2.5mm. You should always check with the manufacturer of the electronic device to be certain.

2. If the power goes out, will the timer remember my settings?

Yes, the timer has an internal memory that will store your settings except for the current time. You need to reset the clock.

3. Does the timer require a battery?

No, it doesn’t require a battery or battery replacement.

4. Why the Straight On/Off Mode(or Sunrise and Sunset Mode) doesn’t work?

Please make sure you have successfully set at least 2-time points and the timer is not in manual mode.

5. Can I use the timer with other brand LED lights?

Yes, any 0-30 VDC light up to 120 Watts using a 2.5mm x 5.5mm or 2.1mm x 5.5mm barrel connector is compatible. Check with your LED lighting manufacturer for any compatibility information.

NOTICE: Attention must be paid to the connection of I/P and O/P, to protect the equipment and ensure normal use.


	LED Light Dimmer	Single Channel Timer Basic	Single Channel Timer Pro
Intensity Adjustment	Yes	Yes, 1-100%	Yes, 1-100%
Program On/Off Times	No	Yes, 1 Channel	Yes, 1 Channel
Ramp Up/Dim Down	-	15 min.	15 min. or 30 min.
Programming Blocks	-	2 (ON and OFF)	Up to 6 (L-01 to L-06)
Dimming Type	-	PWM	PWM
Input Voltage	5-24V	0-30V, 4A Max	0-30V, 4A Max
Compatible Connectors	DC plug 2.1mm x 5.5mm	DC plug 2.1mm x 5.5mm or 2.5mm x 5.5mm	DC plug 2.1mm x 5.5mm or 2.5mm x 5.5mm
Memory Backup	-	Yes	Yes