Feature
●Double Seal Leak Protection---- The PVC boat valve has excellent air leakage performance, double seal leak protection, give you safer protection. The air valve adopts professional manufacturing process, with stable performance and good reliability
●Size---- Comes in three parts: one inside part, one outside part and valve cap. The upper outer diameter is about 6.5cm/2.5. The lower outer diameter is about 4.2cm/1.6. The height is about 5cm
●Wide Application---- The air valve replacement is suitable for most inflatable boats, rubber boats, surfboards, kayaks and canoes, dinghy rafts and etc. The spiral air valve is a great accessory for boating enthusiasts
●High Quality PVC---- The inflatable boat air valve is made of the high-quality PVC material, which is strong, durable and has long service life. The manufacture of the inflatable boat valve meets the strict quality requirements
●Easy to Use---- The boat air value is easy to inflate and to deflate. After inflating, you should tighten the valve and valve cap, in case of air leakage. Ideal and direct replacement for old or damaged pontoon boat inflation valve, dependable to use
Description
How to Use
Method 1: Inflate the air when the spring in the middle of the valve does not pop out (only inhale but not out)
Advantages: After the air is full, pull out the inflation tube, the air nozzle shrapnel will automatically close, and there will be no air leakage.
Disadvantages: Slow inflation speed, long time, abnormal noise may occur due to gas pushing the shrapnel.
Method 2: Rotate the operating lever in the middle of the gas nozzle, and the other shrapnel is fully opened (inlet and out)
Advantages: Fast inflation speed, short time, no abnormal noise
Disadvantages: After being fully charged, when the inflation tube is pulled out, a part of the air will leak because the air nozzle is in a fully opened state, until the operating lever in the middle of the manually rotating air nozzle is closed
Note: Either way, after the air is full, the air nozzle cap and air nozzle must be screwed tightly to prevent air leakage.