AA-BOND F113 is an Optically Clear, low viscosity , High impact epoxy adhesives developed for bonding and small volume potting of plastic or glass optical fibers, lenses and prisms, LED displays, and other optical components. AA-BOND F113 is recommended for laminating, bonding, and sealing applications where excellent wetting, good pot life and improved impact strength properties are required. AA-BOND F113 is two parts adhesive easily mixed and cured at room temperature and develops strong bond to glass and glass fibers, ceramics, many metals and most rigid plastics. AA-BOND F113 bonds offer resistance to mechanical impact and thermal shock, and is also resistant to weather, water, gases and vapors, petroleum products, and mild acids and alkalis. GENERAL PROPERTIES Appearance Clear Components 2 component - requires mixing Mix Ratio by weight 100/30 / Resin/Hardener Benefits Low viscosity Thermal shock and impact resistant Low stress connections Cure Type Room temperature or Heat Cure Operating Temperature -60 to 120 °C Typical Applications Fiber optic assembly, multimode and single mode connectors, small potting and sealing applications UNCURED PROPERTIES: Viscosity At 25 °C 175 Thixotropic Index 1.0 Specific Gravity 1.23 Pot Life 1.5 hours CURE SCHEDULE 24 hours At 25°C 1-2 hours At 65°C CURED PROPERTIES Coefficient of Thermal Expansion, cm/cm/ºC 6.20×10+01 Glass Transition Temperature (Tg), ultimate, °C 102 Hardness, Shore D 86 Refractive Index 1.51 Water Absorption , after 24 hours saturation, % 0.07 GENERAL INFORMATION For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). AVAILABILITY This epoxy can be supplied in various different packages. Call (888) 522-6742 for more information.