Feature:
1. The product is handheld design, easy to use, portable and convenient.
2. Put the Specimen in and you can use it, with high efficiency and good reliability.
3. Mechanical regular design, compression spring detection device, tightly connected assembly, not easy to damage.
4. Independent dial, built-in shrapnel type force transmission, intuitive and clear readings, accurate measurement.
5. Used to measure the hardness of metal, such as cold rolled steel plate , stainless steel, etc.
How to Use:
Put the specimen between the anvil and the indenter and press down the handle until the bottom is felt. At the time the dial indicator will point at a reading which is the hardness value obtained. Excessive pressure beyond this limit will not damage the tester, but it is unnecessary. Hold tight the handle when reading the value. Any torsion or movement will make the reading incorrect during the test.
Specification:
Item Type: Hardness Tester
Model: W-B92
Material: Iron
Application: Metal hardness measurement
Range: 0~20HW
Accuracy: 0.5HW
Applicable Material: Cold rolled steel plate, stainless steel
Hardness Range: 50-92HRB
Specimen Thickness: Approx. 0.6-6mm / 0.02-0.24in
Specimen Inner Diameter: Approx. ＞10mm / 0.4in
Package List:
1 x Hardness Tester
1 x Hardness Block
1 x Spare Indenter
1 x Wrench
1 x Screwdriver
2 x Key
1 x Manual
1 x Carrying Cas