Feature
●0~100HA range, 8.1N Stress at the end of pointer, 35° Pressure needle top cone angle, φ0.79mm diameter Flat cone point, 2.5mm Needle length, Zero setting
●With High grade probe and Hold Function
●Delivers accurate reading with no guessing error
●Conforms to European health & safety requirements and comply with GB/T 531.1-2008 standards
●Applicable to test the penetration medium hardness of rubber, plastic, leather, multi-grease, wax, etc.
[Shore D Hardness Tester]
[Shore a Hardness Meter]
Description
Shore A Digital Hardness Meter Durometer 0~100HA, Rubber Tire
Notes:
- A minimum thickness of 6mm as sample test probes is recommended for measurements optimal results (if its less you may add more layer but should not be more than 3 layers) and measuring point of at least 18mm distance from the outside edges
- It is recommended that measurements be made with the type D durometer when the value is above 90 HA
Set Includes:
- 1x Shore A Durometer
- 1x Instruction Manual
- 1x Hard carrying case
Specifications:
- Resolution: 0.5HA
- Total measure force: 8.1N
- Outside pressure: 1kg
- Pressure needle top cone angle of 35°
- Needle length: 2.5mm
- Flat cone point: φ0.79mm diameter
- Dial Scale: 0~100HA
- On/Off Switch
|
|
|
|
|---|---|---|
|
|
|
|
