Feature

●①　digital display ,easy for reading and high accuracy
●②　Light weight ,small size and easy for carrying
●③　Two units : Kg and N switch into each other
●④　The battery has short circuit ,leakage and overload protection , adopt 3.7V Lithium battery power supply,will shut down automatically without operation within 10 minutes
●⑤　Two measuring mode: Real time and track mode.


Description

11
11

HFBTE Grain Hardness Tester Meter Gauge Corn Wheat Coffee Rice Bean Durometer Penetrometer With Max Load Value 20kg/196N Accuracy ±2％ Inside Type Sensor 2 Units Kg and N

Usage：

  • This digital grain hardness tester is used for scientific research and teaching of agricultural,especially used for testing the hardness of grain（wheat,rice）,adopt advanced testing technology,with the characteristic of high accuracy,strong indication,high resolution,easy operation ,durable and reliable.With its beautiful outlook ,it can be measured by hand on site ,it also can be tested in the workbench in the lab .

Characteristic：

  1. digital display ,easy for reading and high accuracy
  2. Light weight ,small size and easy for carrying
  3. Two units : Kg and N switch into each other
  4. The battery has short circuit ,leakage and overload protection , adopt 3.7V Lithium battery power supply,will shut down automatically without operation within 10 minutes
  5. Two measuring mode: Real time and track mode.

Specifications：

  • Max. Load:20kg/196N
  • Load division value:0.01kg/0.1N
  • Load cell:Inner
  • Accuracy:±2％
  • Power:3.7V Lithium battery
  • Charger time:4~6 hours
  • Battery Continuous use:About 15 hours
  • Battery life:≥300 times
  • Charger:Input：AC 220V 50HZ Output：DC 5V 1000mA
  • Working temperature:5℃～35℃
  • Transport temperature:-10℃～60℃
  • Relative humidity:15％～80％RH
  • Working environment:No source and corrosive media around

How to use it ?

  1. Turn on the instrument ,and enter into measurement interface ,choose the real time mode or peak mode as your requirements.
  2. Put the grain on the platform(better vertical),and then rotate the wheelto move up until the grain break,at the same while ,the digital display show the testing value.
  3. If you need to test again,clean the platform ,and press “ZERO” to clear the screen,and do as the step 2.
  4. After testing ,clean the testing platform,turn off ,put the clamp down ,put all accessories in the tool box for next usage.

11
11