Feature

●Precision lathe with a CNC ballscrew lathe. The wheel tread is cnc lathed to achieve perfectly round wheel. Custom Chuck, not turned on a mandrel. This ensures a flat tread surface.
●Light weight wheel. Average weight is 1.5 grams. Please check your local pack rules as these might not be legal for your race,
●Inner bores are reamed with .0960" reamer. Bored perfectly round and smooth.
●Fastest Outer derby wheel hub faces are coned to minimize contact with the axle head
●Factory edge left on the wheel. Will be factory wheel width.


Description

Benefits

• CNC machined Round and smooth wheels roll faster than standard wheels.

Usage Xlite 1.5g Speed Wheels by Derby Dust can be used without any additional preparation.   However we highly suggest to polish the inner wheel bore prior to racing.  Dont forget to add your favorite Dry Lube before race day!

Important Note The lathing operation removes a small part of the outer tread surface. The bead (serrated edge) is intact. The tread reduction is barely visible to the eye, but is measurable with inspection gauge or a measuring caliper.

AS Always.....  Check YOUR RULES!!!!! We cant stress this enough.

Wheel Diameter: 1.174 ± 0.001 (Raw Wheels: 1.182 to 1.185)
Wheel Bore ID: 0.0960 minimum
Wheel Weight: About 1.5 grams per wheel (Raw Wheels: 2.7 grams/wheel)