Feature:
1. The cylinder body of the nitrogen gas spring has a C shape notch on the upper and a U shape notch on the bottom with M6 screw holes, which is easy to install.
2. The 500 series nitrogen gas spring has high elastic pressure, long stroke and stable operation, which has strong practicality.
3. The piston rod has a high hardness after a special process of fine processing, and the surface roughness reaches about Ra0.02um.
4. The cylinder body of the gas spring adopts an integral cutting process to ensure that the product is safer and more reliable.
5. The cylinder body diameter of the nitrogen gas spring is 38mm, the plunger diameter is 20mm, the size is standard.
Specification:
Item Type: Nitrogen Gas Spring
Material: Alloy
Purpose: Die compression nitrogen cylinder
Cylinder Diameter: Approx. 38mm / 1.5in
Plunger Diameter: Approx. 20mm / 0.8in
Package List:
1 x Nitrogen Gas Spring
1 x Storage Box
Note:
1. Do not use the nitrogen gas spring plunger rod for fixing, and the threaded hole at the end of the piston rod cannot be used as a lifting hole for lifting.
2. Do not modify the following aspects of the nitrogen gas spring:
(1)Drill holes on the cylinder block of the nitrogen gas spring, the sealing ring, etc.
(2)The piston rod is shortened in order to reduce the stroke
(3)Do not perform other processing on the nitrogen gas spring and its accessories
3. Do not use nitrogen gas springs for purposes outside the scope of product catalog specifications.
4. Do not allow the ammonia gas spring to return freely after being compressed, as this will cause damage to the internal structure.