Feature

●The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic.
●This means the microphones input can fit flush against the enclosure of your project. Plus you will not have to deal with trying to solder the microphones wacky footprint.
●This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input.
●So the AUD output can easily be connected to the ADC of a micro.
●The amplifiers AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels.


Description

2PCS - ADMP401 MEMS Microphone Breakout Module Board

Features:

This tiny breakout board features the ADMP401 MEMs microphone. One of the key advantages to this breakout and microphone is the bottom ported input. This means the microphones input can fit flush against the enclosure of your project. Plus you will not have to deal with trying to solder the microphones wacky footprint.

The amplifier on the breakout has a gain of 67 and more than meets the bandwidth requirements of the mic. The amplifiers AUD output will float at one half Vcc when no sound is being picked up. The amplifier produces a peak-to-peak output of about 200mV when the microphone is held at arms length and is being talked into at normal conversational volume levels. So the AUD output can easily be connected to the ADC of a micro.

Specification:

-3dB roll off at 100Hz and 15kHz

1.5 to 3.3VDC supply voltage

Should comfortably output 40mW

SNR of -62dBA

Package includes:

2 x ADMP401 Microphone Breakout Module with pins
Dear customers, there are so many products in this shop, you can choose your favorite products here. We will provide you with quality products and services. If you have any questions about the product, please contact us in time.