Feature

●PRODUCT PERFORMANCE: This anti spark switch adopts a sliding switch mode, which can be turned on by pressing it once, and it will be turned off automatically after standing for three minutes, saving power and worry.
●PREMIUM QUALITY: This anti spark switch adopts anodized aluminum design,Anodized aluminum alloy heat sink,which enhances the heat dissipation capacity, the performance is more stable, and the quality is more reliable.
●PORTABLE: This spark-proof switch Small size, easy to carry and store, convenient to use and with good performance.Add silicone to fix LED and other bottom wires and heat shrinkable tubing.
●WIDE APPLICATION: This DIY anti spark switch is Widely used, can be installed in various products, smaller in size, lighter in weight, suitable for motorcycles, robots, etc.
●SAFE MATERIAL & BEST SERVICES: For any question or problem, please must contact us firstly. We will definitely give you a satisfying solution.


Description

Specification:

Item Type: Anti Spark Switch

Material: PCB board + aviation aluminum alloy heat sink + thermal silica

Model: Anti spark switch intelligent version 200A

Hardware: V2.2

Maximum Voltage: 13S (60V)

Continuous Current: 150A

Maximum Current: 200A

Mosfet: NVMFS5C628NLs

LED Button Diameter: Approx. 12mm / 0.5in

Cable Length: Approx. 250mm / 9.8in

PCB Thickness: 4 layers x 3oz copper = 12oz copper

PCB Size: Approx. 40 x 32mm / 1.6 x 1.3in

Enhanced Functions: 

1. High-side switch ≥It is safer when used with multiple ESCs and other devices.

2. Surge current limit. The RC delay network limits the inrush current to a safe level.

dV/dt is ~100V/s (for power electronic equipment, this is very slow, fast is 50,000,000V/s). With an output capacitance of 6,000 uF, this is an inrush current of 600 mA.

3. Smart power on/off

Start from scratch. It has a blanking timer of 12 seconds after closing. During this period, it can still be opened by a switch.

Turn off automatically. It will automatically turn off after 20 minutes. The output voltage must change at least 500mV in any three-second interval to reset the shutdown timer.

4. Support momentary button. Hold down for 0.3s to open, 1s to close. Press and hold it to cycle on and then off.

5. High power, 150A continuous.

Very low idle power consumption (about 300uA) will last for months of battery life

6. Applicable: RC Car, UAV, model airplane, ship model, car model high-current products, DIY anti spark switch, high-power type electric vehicles, industrial DC high-power contact products, frequent high-power power supply products, etc.

Package List:

1 x Anti Spark Switch

Note:

1. Prevent small sparks from causing explosions in certain spark?sensitive areas.

2. Add copper bars to achieve better heat dissipation and overc