You can now turn your M.2 NGFF SSD drive into a 2.5 inch SATA III or External USB 3.0 Enclosure with the SABRENT EC M2CU. Exclusively designed for M.2 NGFF SSD B or B+M Key supporting 2242 (42mm), 2260 (60mm), and 2280 (80mm) size drives. Data transfer rates can reach up to 5 Gb/s utilizing this interface. Slim Aluminum casing, Plug and Play no driver install required. Note: It doesn’t support M.2 PCIe NVMe or M.2 PCIe AHCI, Pls check your M.2 SSD type before place order. ● Compatible with M.2 NGFF SSD and SATA enable host devices such as Desktop & Laptop computer systems and Hot Swap 2.5 SATA Bays. ● Convert an m.2 NGFF solid state drive into a USB 3.0 or a Standard 2.5in SATA III 6Gbps SSD. ● This is backwards compatible with USB 2.0 and 1.1 with their transfer speeds. ● Exclusively designed for M.2 NGFF SATA SSD B or B+M Key. ● Added protection for your SSD with enclosed housing. ● Support M.2 from factor: 22x42, 22x60, 22x80. ● System performance maximization. ● Plug and play no drivers required. ● Standard SATA 22pin connector. ● B & B+M Key compatible. The SABRENT HB U930 is a premium 7 Port High Speed USB 3.0 Hub that is designed to maximize compatibility with USB 3.0 devices, including power hungry USB powered hard drives, scanners, etc, with its provided 12V/4A power supply. Supplies up to the 1.5A per port and 2.4 amps from the two charging ports Hub Controller The SABRENT HB U930 features per port over current protection to safeguard your connected devices against damage or data loss due to over voltages. Not Just a USB Hub, Also a Fast USB Charger The SABRENT HB U930 features two USB fast charging ports that provide high power (2.4 amps per port) under Fast Charge Mode2. Taking up only one AC outlet, it gives you the ability to simultaneously fast charge two power hungry devices.