Feature
●【Better Visibility】2 Pcs Eagofar T1 Series H11/H8/H9 high quality Led Headlight Bulbs single beam for Headlight and Fog light replacement, has a wide spread pattern--sufficient & uniformity down-the-rod light, which giving you comfort & safety driving experience at night.
●【Top Automotive】Grade 1860 Led Chips with High Power 70W(35W each bulb); Luminious Flux:8000Lm(4000lm each bulb),6500K cold white, super-bright but will not dazzle the other traffics; IP68 Water&Dust-proof: Worry-free in bad weather; Operating Temperature:-40-150 degree Celsius, friendly in Summer&Winter.
●【Fit for 99.9% Vehicle】Working Voltage: DC 9-32V (fit 12V, 24V vehicles). Built in Canbus to avoid error codes such as flashing or defective, Non-destructive installation.
●【convinient installation 】No matter of the factory housing with a dust cover or limited space on the passenger side, the H11/H8/H9 can be fitted perfectly, just plug and play. Light-up just 0.1 Second.
●Premium Cooling System:Compact all-in-one integrated design, Built-in turbo fan,aviation 6063 aluminum profile of body material;above three radiating solutions to prevent the bulb from burning out, extending service life.
[9005 & HB3(2)]
[9012]
[H11 & H8 & H9(2)]
[9005 & HB3]
[H11 & H8 & H9]
[9006 & HB4(2)]
[9004 & HB1]
Description
Eagofar LED Headlight Bulbs 9005 HB3 2 Pcs of 70W 8000 Lumens 6500K Super Bright LED Chips Conversion Kits F-T1 Series Single Beam
|
|
|
|
|---|---|---|
Extremely Bright Than Original
|
Waterproof & Overheat Protection
|
Long Lifespan, Canbus-inside
|
About Led Headlight Bulb
- Please do not press the lamp bead hard and make sure the lamp beads cleaning).
- Please do not remove the waterproof rubber ring.
- Please make sure that there are no large particles of dust around the chunk when installing.
How to install it?
For H1,H3,H4,H7,H13,9004,9007
- Fine the Original Halogen Bulb Location.
- Take out the Original Halogen Bulb.
- Take our socket, install it to make sure the position lock the socket and make it firm.
- Aim at the chunk slot and put the Led bulb into the chunk.
- Rotate Slightly and make the bayonet fixed.
For 9006 9006 9012 H11
- Remove the Cover and the Original Halogen Lamp.
- Put the New Led Bulb into the chunk directly and fix the position(Adjust the bulb left or right to take the best beam pattern).
- When finish the installation, please connect the power and test the light, adjust the light to the best beam pattern(Adjust left and right)
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 9005/HB3 | 9006/HB4 | H1 | 880/881 | H7 | H4/9003 | |
| Color Temp | 6500K | 6500K | 6500K | 6500K | 6500K | 6500K |
| Lumens | 8000Lm | 8000Lm | 8000Lm | 8000Lm | 8000Lm | 8000Lm |
| Type | Single Beam | Single Beam | Single Beam | Single Beam | Single Beam | Hi-Lo Beam |
| Power | 72W | 72W | 72W | 72W | 72W | 72W |
| Lamp Beads | 1860 Chips | 1860 Chips | 1860 Chips | 1860 Chips | 1860 Chips | 1860 Chips |
| Canbus | With | With | With | With | With | With |
| Factory outlets | Yes | Yes | Yes | Yes | Yes | Yes |