Feature

●Lifting Range: 3.5 inch - 14 inch (90mm - 360mm),Lifting Capability: 2 Ton (approx. 4400lb). Package comes with 4 Scissor Jacks and 4 Crank Handles.
●The lifting height can be adjusted from 3.5 to 16", and the lifting capacity is about 4400Lbs per piece.
●Design of the jack is compact and user-friendly, it is easy to operate and less effort needed to lift a car.
●This levelling scissor jack is made of heavy duty steel, coated with rust-proof finish. Anti-corrosion handle for adjusting height.
●Suitable for small and medium sized vehicles(Car/Truck/Vehicle/RV/Trailer) - Use to fit Ford, Honda, Toyota, GMC, Chevrolet,Buick,Santana, Vietnam and other most cars.


Description

This simple to use scissor jack set stabilizes your Car/Truck/Vehicle/RV when its in need of a fix. Bolt the jack underneath the front or rear of your vehicle and use the manual crank handle to securely raise or lower your vehicle off of the ground. It features a compact and portable size thats convenient to store while youre on the road. The height easily adjusts from 3.3 inches minimum to 14 inches maximum. It also includes an extra replacement screw so youll be able to repair your vehicle even if the first screw is lost or replaced. The durable heavy-duty metal construction features a weather and rust-resistant finish, so you can hoist up your vehicle to change a flat tire, or do general maintenance anytime, even during rainy weather. A 4,400 pound weight limit promises long-lasting strength while the wide bow-tie base adds extra stability when used on softer ground such as dirt or grass.
Specification:


Colour: Black
Material: Heavy Duty Solid Steel
Folding Size:26 2/5"X 14 1/5"X4" (L X W X H)
Lifting Height: 4-14"
Lifting Capacity: 2.0 Tonne/4400lbs
Weight:4.6Lbs/pc
Net weight: 2.1KG


Package Content:
4 X Scissor Jack
4 X Crank Handles


Before Use
1. Check before each use for abnormal conditions such as cracked welds, leaks, damaged, loose or missing parts.
2. Inspect the jack immediately if lift is believed to have been subjected to an abnormal load or shock.
3. If the jack is found to be damaged, it should be removed from service until properly repaired.

CARE AND MAINTENANCE
1. When jack is not in use, lifting arm should be in full down position.
2. Always keep jack clean and keep the screw and bearings well lubricated.
3. Store the handle with care.