Feature

●Turn the radio off and plug in the LNK Gateway cable. Then plug the other end of the cable into any Android device that has a 3.5mm, 4 conductor jack.
●Turn on the radio and make sure it is set on a channel with VOX programmed and enabled.
●On the phone launch the ZELLO App. Go to Options > Push to Talk Buttons and make sure the "VOX" option is enabled.
●Still in ZELLO App, navigate to the Contact or Channel list and choose the one you want for Gateway operation. Make sure "VOX" icon is highlighted in blue.
●Power on the Two-way radio and put it on the channel you are going to use for gateway operations (make sure VOX is enabled).
●If done correctly you should be ready to use. Calls received on the Two-way radio will be broadcast on the ZELLO App. Calls received on the Android device will be broadcast on the two-way radio. You may have to adjust the phone and radio volumes for best audio quality.
●Note that sometimes you will also have to adjust VOX settings (like Delay) on the two-way radio in order to get the best possible performance. VOX can have delay and be sensitive to audio level and voice differences.


Description

Create a GATEWAY between your Two-Way radio system and the ZELLO PTT App! This simple cable assembly plugs into CDM/CM/GM/M/PM/SM MOBILE radios using the RJ45 Speaker Mic jack and any Android phone (or tablet) with a 3.5mm, 4-conductor jack to create a link between the radio system and the ZELLO PTT App. It’s pretty easy to set up and use but the radio MUST be set up for VOX Operation! Not all Motorola two-way radios are capable (or might need to be programmed) for VOX so make sure this is possible before purchasing our LNK cable.