Feature:
1. Highpurity copper windings can maximize efficiency. Accuracy designed for maximum energy conversion.
2. The precisely balanced rotor, with high smoothness, can achieve the best reliability and maximum speed.
3. Highstrength magnets provide unparalleled brushed motor performance, excellent torsion and long life.
4. Direct welding wiring guide, providing flexible welding options. Suitable for 1/10 1/12 RC offroad vehicles.
5. Double ball bearings, balanced speed, low noise, detachable/replaceable structure, easy to and maintain.
Specification:
Condition: 100% Brand New
Item Type: RC Motor
Material: Carbon Steel + Copper
Color: Black
No-Load Speed: 23000 ± 12%RPM
No-Load Current: <2.2A
Voltage: 7.4V-11.1V
Motor Shaft: Approx. 3.175mm / 0.1in
Blocking Current: 13.7-76.4A
Torsion: 2670.0g.cm
Shaft Length: Approx. 12mm / 0.5in
Diameter: Approx. 35.9mm / 1.4in
Length: Approx. 48.6mm / 1.9in
Connection: CCW
Compatible: Suitable for 1/10 1/12 RC off-road vehicles.
Installation and Maintenance:
1. If you want to replace the motor mounting screws, please use the same type and size as when your vehicle was initially installed.
2. Do not over tighten the motor mounting screws. Doing so may strip the threads of the mounting holes.
3. Connect the + and -motor leads to the corresponding leads on your Electronic Speed Control ( ESC ).
4. To the motor, please gently wipe off the dirt regularly, especially pay special attention to the area around the ball bearing. Do not spray cleaners or solvents into the motor.
5. Check the brushes regularly to make sure they move freely inside the hood.
6. When the brush is worn or there are signs of color change, please replace the brush.
Pr