Feature
●【Multifunctional 4k Kvm Over Ip Extender】 KVM extender Resolution supports 4K@30Hz 4:4:4, Ultra HD is completely lossless, low latency, support full-format HDMI audio, one to Many broadcast mode,USB2.0 pass-through. Meet your diverse needs.
●【Long-Distance Stable Transmission】 Thw usb hdmi kvm extender 3840*2160 30HZ with extender kit over Cat5e/6 allows you to transmit HDMI audio/video up to 328 ft (100m) . The kvm over ethernet 4k supports overall delay less than 50MS. The cascade mode can extend the KVM signal and USB signal by up to 20 kilometers.
●【802.3af POE Power Over Ethernet】kvm extender cat6 support PoE（802.3AF）power supply, improve system robustness and convenience. Improve the stability and speed of signal transmission.
●【One to Many Broadcast Mode】kvm extender over cat6 support one transmitter and connect multiple receivers to save the number and cost of product transmitters to the greatest extent. Maximum support 1 send 253 receive.
●【4 USB2.0 Ports】 The 4k kvm extender with usb receiver supports 4 USB2.0 ports and is compatible with most USB devices. Such as printer, mouse, keyboard, U disk and so on.
Description
HDMI KVM EXTENDER with USB2.0
HDMI KVM Extender for Office / Home / Meeting room
- Q： Yellow light led of LAN port is not light?
- A： 1. Check connection of network cable 2. Change short network cable to test 3. Check whether sender and receiver working correctly(Status LED flflash slow)
- Q： Green light led of LAN port is not light
- A： 1. Check whether the HDMI source is working correct. 2. Check whether the “signal” LED on sender side is light on. If not, please check the HDMI Connection, HDMI cable, HDMI resolution setting.
- Q： No display on screen connect to receiver?
- A： 1. Check the HDMI connection, HDMI cable between receiver and screen. 2. Check whether sender and receiver working correctly(Status LED flflash slow) 3. Check whether the screen support 4K, whether the output resolution supported by screen.
- Q： USB device not work
- A： 1.Check the USB connection between sender and PC/HOST 2.Check whether the USB connection LED is flashing 3. Press Button2 on receiver side to build USB connection between receiver and sender
- Q: How to use the kvm extender work with local device?
- A: This device support 1 sender to multi receivers, because it use broadcast protocol.So please beware that if you want to use this device with other devices in same local network. You need to build a VLAN connection between sender and receiver on management switch.
- Q:Why doesnt it work when sharing with other devices?
- A:Because it CANNOT be shared with other devices under a gigabit switch
Working Mode
|
|
|
|
|---|---|---|
POINT TO POINT for Exhibition Hall
|
One to many for Round table
|
Many to many via VLAN for Curtain screen
|
|
|
|
|
|
|
|---|---|---|---|---|---|
| 4k HDMI KVM Extender 563 | 4k HDMI KVM Extender 561 | 1080 HDMI KVM Extender 560 | 1080 HDMI Extender 373v4 | 4K HDMI Extender 393 | |
| Resolution max | 3840x2160@@30Hz | 4Kx2K@60Hz | 1920x1080@60Hz | 1920x1080@60Hz | 4Kx2K@60Hz |
| RX Number of USB2.0 ports | 4 | 4 | 2 | 0 | 0 |
| Transmission wire | Cat5e/6 and above | Cat5e/6 and above | Cat5e/6 and above | Cat5e/6 and above | Cat5e/6 and above |
| Single wire transmission distance | 524FT ( 160m ) | 196FT ( 60m ) | 262FT ( 80m ) | 482FT ( 150m ) | 328FT ( 100m ) |
| Operating mode | Point-to-point/one-to-many/cascade | Point-to-point | Point-to-point | Point-to-point/one-to-many/cascade | Point-to-point |
| HDMI version | 1.4 | 2.0 | 1.3 | 1.3 | 2.0 |
| HDCP | ? | ? | ? | ? | ? |
| Power | PoE(802.3AF)/ 12V1A | POC 12V2A | POC | POC 5V/1A | POC 12V1A |
| LAN Internet | No | No | No | Yes | No |