●▶【Applications】This dual quarter inch to xlr cable is mainly used for a device which has left and right 1/4" output jack and need to combine two channel signal into one. These devices mainly include electronic drums, keyboard, mixer, amp, DJ controller, amp attenuator, podcast mixer, etc. Customers are most likely to use this 2 quarter inch to xlr cord to send L/R signal to a speaker, a recorder, a mixer, a camcorder, or an amp from those devices for audio recording or editing. ●▶【Specification】This dual 1/4 mono to xlr cable is 10feet/3meter in length. It is cotton braided, flexible and heavy duty. The two TS ends are gold plated, it can reduce signal distortion. The shield material is 90% OFC, it can keep out RFI and EMI, no buzz or hum will produce. We also have a drag-proof solution in the xlrm connector, so the internal wire wont break out easily, the cable can work for a very long time. This is a heavy duty dual 1/4 ts to xlr stereo cable. ●▶【Splice Distance】The distance from the splice to the TS end is 45cm/1.5feet, means the distance between the two TS end is 3feet as the longest. So its not convenient to use this cable to connect two separate instrument. ●▶【Unbalanced Transmission】Please kindly note the 3 pin XLR male end is unbalanced connection. We have soldered pin1(sleeve) and pin3(cold) together, it is connected to the sleeve of the TS ends. Pin2(hot) is connected to the tip of the TS ends. So you dont need to distinguish right channel from left channel for the TS ends. They can be mixed. ●▶【10FT x1】Package only include one 10feet/3meter dual mono 1/4 to xlr cable. Please double check if this length is right for you. ●▶【Customer Support】We offer 2 years warranty for this xlr splitter to 1/4 cable, for any issues during the warranty time, customers can come back for replacement. Our technical support is also online for 24hours. Should any issues happened after package received, customer can message us from order page. Well give response within 12 hours.
[10FT]
Description
Dual 1/4 TS Mono to XLR Male Cable, Double Quarter Inch to XLR Y Splitter Cable, 10Feet
This dual quarter inch to xlr cable is mainly used for a device which has left and right 1/4" output jack and need to combine two channel signal into one. These devices mainly include electronic drums, keyboard, mixer, amp, DJ controller, amp attenuator, podcast mixer, etc. Customers are most likely to use this 2 quarter inch to xlr cord to send L/R signal to a speaker, a recorder, a mixer, a camcorder, or an amp from those devices for audio recording or editing.
Professional Grade Dual 1/4 TS to XLR male Splitter Cable
Nylon braided, heavy duty
This dual 1/4 TS to XLR Y cable is nylon braided design, it is strong and heavy duty.
OFC shield, no hum no buzz
This dual quarter inch to xlr breakout cable is full covered with spiral OFC(Oxygen Free Copper). OFC layer can effectively keep out RFI and EMI. Under the OFC layer, there is also a aluminum foil layer. With OFC and aluminum foil layer, this cable will carry your signal without having to worry about interference. Anyway, we do not suggest to put the cable over AC power plugs, power adapters, chargers and others that ouput RFI and EMI.
Gold plated TS plug
Dual 1/4 TS mono plug is gold plated design, this design can reduce signal distortion.
The distance from the splice to the TS end is 45cm/1.5feet, means the distance between the two TS end is 2.8feet as the longest. So its not convenient to use this cable to connect two separate instrument.
This dual mono to xlr male splitter cable is unbalanced connection. The tip of the both 1/4 TS connector is soldered together to link to the pin2(hot pin) of the XLR connector. So you dont need to distinguish right and left channel from the two 1/4" TS connector. They can be mixed.