Feature
●Provides counterweight solutions for camera setups that cannot be balanced directly on the roll axis.
●Solutions for camera setups that cannot be balanced directly on the roll axis (e.g., Blackmagic Pocket 4K/6K with a large lens).
●This product is Compatible with DJI RS 2 and DJI RSC 2.
●Material: CNC made counterweights,anti-rust and durable to use.
●What You Get:Tilt Motor Clamp × 1；200g Counterweight × 2；100g Counterweight × 2.
Description
Associated products: DJI RS 2, DJI RSC 2
Provide counterweight installation solutions for situations where the roll axis cannot be leveled, mainly for machines where the roll axis may not be leveled directly, such as BMPCC 4K/6K+.
Introduce
This DJI R roller balancing device provides a solution to make the direction of the roller smooth. Designed specifically for BMPCC large lens 4K/6K camera scenes. Solved the problem that the center of gravity cannot be leveled when the device is tilted to the left.
Note
The setting of the counterweight will increase the load of the shovel disk tilt. The total weight of the equipment should not exceed the maximum load of the bucket.
|
|
|
|
|---|---|---|
|
The counterweight clamp is fixed on the pitch shaft motor by manual screws and nuts, which can be quickly clamped and assembled without disturbing the rotation of the shaft arm. |
Built-in silicone anti-skid washer to protect the motor and prevent scratches. The counterweight can be installed on the 1/4 threaded hole in the center of the counterweight clamp and can be overlapped, which helps the camera to adjust the balance in the rolling direction. |
Loosen the counterweight clamp to the open state, fix it on the stabilizer shaft motor, and lock it with a hand nut. The counterweight is installed on the 1/4 threaded hole in the center of the counterweight clamp, adding 100g and 200g counterweights according to the actual situation. |
Specification
Standard weight: about 695 size
Weight clip: 73.5 x 51 x 28.5
Dimensions in mm: 100g
Weight: 33 x 33 x 23 mm
Size: 200g Counterweight: 44×44×25mm
