Overview

You need to extend HDMI signal and looking for reliable futureproof solution packed with all necessary features? Stop right there and search no more because you already found it ? BZBGEAR BG-EXH-150C!

This device with a help of HDBaseT technology will extend HDMI signal for up to 150M (492 ft) with resolutions for up to 4K@60Hz using single CAT6 ethernet cable. But probably this is not the only feature you are looking for. So, it can do much more ? along with HDMI it will extend IR and RS-232 signal, so you can control your TV from the source side (for example, when using 3rd party control system) or you can control the source (like your cable box) from the TV side.

If you need to connect local audio system ? there is a 3.5mm mini-jack connector on the receiver which provides de-embedding audio from HDMI signal. If you need to duplicate transmitted signal ? there is a HDMI loop-out connector, which you can use to connect monitor or another device.

Power over category cable adds more convenience for your setup ? only one side (either transmitter or receiver) needs power adapter to be connected to electrical outlet, and to make it secure it has locking connector.

BZBGEAR BG-EXH-150C also supports many modern video technologies (like HDR, HDR10+, Dolby Vision and HLG) and audio formats as well as digital media protection for up to HDCP 2.2.

Features

• HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant
• 18Gbps video bandwidth
• HDMI loop output on the transmitter
• With bi-directional IR, RS-232 and CEC pass-through
• Compact design for easy and flexible installation
• Durable metal housing

Package Contents

- 1 x 18Gbps HDMI over HDBaseT Transmitter

- 1 x 18Gbps HDMI over HDBaseT Receiver

- 1 x IR Blaster cable (1.5m)

- 1 x 20~60KHz IR Receiver cable (1.5m)

- 4 x Mounting Ears

- 2 x 3-pin Phoenix connector

- 1 x 24V/1A Locking Power adapter

- 1x User Manual

- 1х Quick Start Guide

Interface:

1. Power LED: Red LED indicates that the transmitter is powered on.

2. SERVICE port: Micro USB firmware update port. 3. DC 24V: DC 24V/1A power supply input port.

4. Connection Indicator lamp: Solid: Transmitter and Receiver are in good connection status. Flashing: Transmitter and Receiver are in poor connection status. Dark: Transmitter and Receiver are not connected.

5. HDBT OUT: RJ45 connector for connecting the HDBT IN port of the receiver with a CAT 5e/6 cable.

6. Data Indicator lamp: Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal.

7. HDMI OUT: HDMI loop output for display. 8. HDMI IN: HDMI source input.

9. IR IN: IR input port for receiving the signal of IR remote.

10. IR OUT: IR output port for control of source device. This IR output signal is from the IR IN port of the receiver.

11. RS-232: 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter. 12. Power LED: Red LED indicates that the receiver is powered on.

13. SERVICE port: Micro USB firmware update port. 14. DC 24V: DC 24V/1A power supply input port.

15. Connection Indicator lamp: Solid: Transmitter and Receiver are in good connection status. Flashing: Transmitter and Receiver are in poor connection status. Dark: Transmitter and Receiver are not connected.

16. HDBT IN: RJ45 connector for connecting the HDBT OUT port of transmitter with a CAT 5e/6 cable.

17. Data Indicator: Solid: HDMI signal with HDCP. Flashing: HDMI signal without HDCP. Dark: No HDMI signal. 18. HDMI OUT: HDMI output for display.

19. AUDIO OUT: 3.5mm stereo connector for analog audio output.

20. IR IN: IR input port for receiving the signal of IR remote. 21. IR OUT: IR output port for control of display device. This IR output signal is from the IR IN port of the transmitter. 22. RS-232: 3-pin Phoenix connector for RS-232 command transmission. The RS-232 command will pass-through from transmitter to receiver or from receiver to transmitter.