Feature
●?Multi Modular Plugs Application ? Fast, reliable modular-crimp connector installation for voice and data applications. Crimps RJ45 Cat 3/4/5/5e/6 (8x8) (8P8C), RJ12 6-position (6x6) (6P6C), RJ11 4-position (6x4) (6P4C) and RJ11 2-position (6x2) (6P2C). Also works for pass through connectors with built-in pass through blade.
●?Compact Design Modular Crimper ? 2/3 the size of traditional crimpers, one hand operation with rust resistant black oxide coated steel core. Recoil spring loaded ergonomic matte handle returns tool to ready position upon cycle completion helps you save time and effort. The compact size fits in any pocket, tool pouch and chest.
●?Built for Shielded Network Connectors ? Crimps RJ45 (Data) and RJ12 RJ11 (Voice) fixed die cavities, supports Cat5 Cat5e Cat6 Ethernet STP/UTP cables, twisted pairs, phone, voice and data cables crimping. Specially design for Cat6a Cat7 shielded connectors and even crimp the metal clip on the plugs.
●?Built-in Cat7 to Cat5 Switcher ? Switch from Cat7 to Cat5 crimping by using a screwdriver to loosen then switch up or down to change the compression mode. Enables you to crimp both shielded CAT6a connectors as well as standard RJ45 connectors. The Cat7 mode stands for Cat7 shielded plugs crimping. Cat5 mode stands for Cat5e and Cat6 plugs crimping.
●??What’s in the Package? ? Blister package includes 1x CAT5 CAT6 CAT7 Pass Through Crimper, come with 1x Carry Pouch and 1x Mini Punch Down Tool, item should have a Yankok logo on it for genuine mark. After use, you can conveniently store it due to its locking feature, all together make this all-in-on network tool a top-ranked choice today.
[Yellow]
[Black]
Description
Top-ranked CAT5 CAT6 CAT7 Pass Though Crimper
It doesn’t matter whether you are an IT professional who is dealing with network cables and connectors daily or just a home user who is a newbie to the Ethernet network, you should get the Yankok Ethernet crimping tool. 2/3 the size of traditional crimpers, crimps pass through and standard RJ45 RJ12 RJ11 connectors and CAT6a shielded modular plugs, come with tool carry pouch and mini punch down tool, all together make this network tool from Yankok is a top-ranked network crimper today.
T568A or T568B - Which One Should I Use?
If the installation is residential, choose T568A unless other conditions apply. If components used within the project are internally wired either T568A or T568B, duplicate this wiring scheme. Use your fingers to put the wires in the correct order so they can be properly crimped. The proper sequence is as follows from left to right: T568A - White/Green, Green, White/Orange, Blue, White/Blue, Orange, White/Brown, Brown. T568B - White/Orange, Orange, White/Green, Blue, White/Blue, Green, White/Brown, Brown.
How to Use a CAT5 CAT6 CAT7 Pass Through Crimper
|
|
|
|
|
|---|---|---|---|
Strip and cut the cableStrip the cable back 1 inch (25 mm) from the end. Insert the cable into the stripper section (round hole) then rotate the crimping tool around the cable to create a clean cut then remove the sheathing. Untwist and straighten the wires inside of the cable, cut off the small plastic wire separator or core so it’s out of the way and cut the wires into an even line 1?2 inch (13 mm) from sheathing. |
Insert the wires to connectorInsert the wires into the RJ45 connector with right orders (T568A/B), then insert the cable into the connector so that each of the small wires fits into the small grooves in the connector. The sheathing of the cable should fit just inside of the connector so it’s past the base. Each wire must fit into a groove before you crimp the connector. |
Full-cycle connector crimpingStick the connector into the crimping part of the tool and squeeze twice. Insert the connector in the crimping section of the tool until it can’t fit any further. Squeeze the handles to crimp the connector and secure the wires. Release the handles, then squeeze the tool again to make sure all of the pins are pushed down. |
Test the cable and doneUse the Yankok network cable tester will help you save time and effort ? Powered by 6F22 9V 25MA battery (which is not included), come with user manual and instruction. LED display with power switch, scanning mode switch and test switch for manual scan. Verify cable continuity, open short and miswiring, with remote kit, test on wall plate, patch panel and test grounding. |
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| Click for - Yankok RJ45 RJ12 RJ11 Pass Through Crimpers (Yellow and Black Grips) | Click for - Yankok The Ultimate Pass Through Crimpers (Multi-Color) | Click for - Yankok RJ45 RJ12 RJ11 Network Cable Testers (Multi-Style) | Click for - Yankok Cable Wire Stripper Cutters (Multi-Style) | Click for - Yankok CAT5 CAT6 Network Patch Panel (6-48 Ports) | Click for - Yankok CAT5 CAT6 Pass Through Connectors (100 Pcs/Jar) | |
| Registered Jack | RJ45 RJ12 RJ11 | RJ45 RJ12 RJ11 | RJ45 RJ12 RJ11 and Coaxial | RG6 RG59 Coaxial | RJ45 | RJ45 |
| Number of Pins | 8P 6P 4P | 8P 6P 4P | 8P 6P 4P and Coax | 10-20 AWG Gauge Wire | 8P | 8P |
| Category | CAT5 CAT5e CAT6 CAT6a CAT7 | CAT5 CAT5e CAT6 CAT6a CAT7 | CAT5 CAT5e CAT6 CAT6a CAT7 | 0.5-6.0mm2 Wiring | CAT5 CAT5e | CAT5 CAT5e |
| Function | Crimp, Cut and Clamp | Strip, Cut and Crimp | Network and Coaxial Cable Test | Strip and Cut | Punch Down | Pass Through |
| Note | Crimps Standard and Pass Through Connectors | Crimps Standard and Pass Through Connectors | Battery use 6F22 9V 25MA (NOT INCLUDED) | Universal Cables | Come with Bracket and Basic Termination Tool | 100 Pcs / Jar |
Yankok
Build a better life.
We accept both retail and wholesale orders. Check with us for bulk discounts and shipping details if in need.