●Use 16 Pins T harness to add on aftermarket backup camera to factory radio display. **NOTE** RED WOLF 16-Pin harness is not 12 volt power wire, if your camera needs 12 volt, you will have to connect 12v from vehicle somewhere else. ●CAM TY11 T-harness compatible with Toyota 2012-2013 4-Runner (no factory amp), 2013-2014 Avalon, 2012-2015 Prius, 2012-2015 Prius PHV, 2012-2014 Prius V, 2013-2015 Rav-4, 2013 Sequoia, 2012-2013 Tacoma (with Nav), 2013-2014 Venza, 2012-2013 Camry. ●CADTA01 add-on harness for aftermarket reverse backup camera replacement for Scion: FRS 2013-2015, iQ 2014-2015 , tC 2014-2015 , xB 2014-2015 , xD 2014-2014. ●Compatibility Notes: Only works with factory radios with the Display screen or Navigation radios. Vehicle must be equipped with a 6.1" inch touch video screen and have 16-pin connector. ●Package included: 1 x 16pins backup camera wiring T-harness. **When retaining the factory backup camera w/ an aftermarket radio, please search this ASIN: B0945W58B2 **
Description
Reverse Camera T-Harness 16-Pin Add on Aftermarket Backup Camera
Adjust DC 12V to 3.3V 5V 6V 9V DC Step Down Converter Power
RED WOLF Voltage Step Down Switcher Harness work as input 12V-14V but finally output 3.3V 5V 6V 9V to meet your car devices install need. Wont work for wider Voltage.
Product Details
RCA Plug
Support the use of video or audio equipment with RCA type jacks of rear-view cameras
Male and female connector
16 pins Male connector plugs into factory radio connector
16 pins Female connector plugs into factory stereo navigation