Feature
●YHTAUTO Affordable and Prime Window Lift Regulator, Directly Fit
●Fits Ford Bronco/F-150/F-250 1980-1996, F Super Duty 1988-1996, F-100 1980-1983, F-250 HD 1997, F-350 1980-1997, F53/F59 1988-1996
●Location: Front Right, Passenger Side
●Reference Number: F6TZ 1523208-AA, 741-754, 83141, 3552-6509R, 82-32R, 73141, 11A68, WL43067
●Please check the vehicles make, model, year and the particular note to make sure the part fits your car. If any query, please do not hesitate to contact us
[Front Passenger Side]
Description
Item Specification
Item Type: Electric Window Regulator With Motor
Material: Metal and Plastic
Install Location: Front Right, Passenger Side
Reference Part Number: F6TZ 1523208-AA, 741-754, 83141, 3552-6509R, 82-32R, 73141, 11A68, WL43067
Product Features
- Strong lifting bracket insures efficient operation and longer durability.
- Thickened steel cable and capped ends resist commonly break or causing pull through.
- Matched with the original mounting holes, properly fit.
- Tested to ensure a trouble-free installation and excellent performance.
Vehicle Information
For Ford:
- Bronco 1980-1996 All Engine
- F Super Duty 1988-1996 All Engine
- F-100 1980-1983 All Engine
- F-150 1980-1996 All Engine
- F-250 1980-1996 All Engine
- F-250 HD 1997 All Engine
- F-350 1980-1997 All Engine
- F53 1988-1996 All Engine
- F59 1988-1996 All Engine
- Please confirm the vehicles model, year, body style as well as the connector when you purchase!
- Each window regulator is for specific application!
General Instruction on How to Install the Window Regulator!
|
|
|
|
|---|---|---|
|
Step 1: Detach the door panel Step 2: Loosen the bolts and screws for the regulator and window glass. Raise the glass window and secure it with tape Step 3: Take out the old regulator and motor |
Step 4: Install the new regulator in the same position Step 5: Reinstall all the bolts and screws Step 6: Tighten the screws with the wrench |
Step 7: Connect the wires to the window motor Step 8: Lower the glass window to the new regulator and tigthen the mounting hardwares. Put back the plastic liner and door panel Step 9: Test if the regulator functions good |
