[60A]
CXZTCL Solar Charger Controller 12V/24V PWM Solar Controller Intelligent Regulator- ??【Product Parameter】 Rated Voltage: 12V/24V; Recharge Current:60A; Discharge Current: 10A; Max. PV Voltage: <41V; Floating charge: 13.7V/27.4V (defaul); Discharge Stop: 10.7V/21.4V (defaul); Charge recover voltage: 12.6V/25.2V (defaul); Stand-by Current:<10MA; USB Output: 5V/2A max; Working Temperature: -35~60℃ ??【Features】 ?Build-in industrial micro controller. ?Big LCD display,all adjustable parameter. ?Fully 3-stage PWM charge management. ?Build-in short-circuit protection,open-circuit protection,reverseprotection,over-load protection. ?Dual USB output, the maximum current of 2.5A, to supportApplesmobile phone charging. ?Dual mosfet Reverse current protection,low heat production. ??【Please Note】 ◎Make sure your battery has enough voltage for the controller torecognize the battery type before first installation. ◎The battery cable should be as short as possible to minimize loss. ◎The regulator is only suitable for lead acid batteries:OPEN,AGM,GELit is not suited for nickel metal hydride,lithium ions or other batteries. ◎The charge regulator is only suitable for regulating solar modules.Never connect another charging source to the charge regulator. ◎The controller will generate heat when it is running, please be careful to install the controller on a flat, well-ventilated surface. ??Thank you for patronizing. Any problem just contact us and we will try our best to help you!