[Tracer2215BN-20A]
1)Unplug the RTS, the temperature of battery will be set to a fixed value 25 ºC.
2)Please connect the inverter to the battery rather than to the controller, if the inverter is necessary.
3)The RS-485 port and RTS port is not SELV circuit, it must have isolation between the port and the place where the end user can access directly.
Four methods to configure the controller:
Tracer1215BN | Tracer2215BN | Tracer3215BN | Tracer4215BN | |
---|---|---|---|---|
Nominal system voltage | 12/24VDC Auto | 12/24VDC Auto | 12/24VDC Auto | 12/24VDC Auto |
Rated charge current | 10A | 20A | 30A | 40A |
Max. PV open circuit voltage | 150V/138V(at 25℃) | 150V/138V(at 25℃) | 150V/138V(at 25℃) | 150V/138V(at 25℃) |
Max. PV input power | 130W(12V) 260W(24V) | 260W(12V) 520W(24V) | 390W(12V) 780W(24V) | 520W(12V) 1040W(24V) |
Battery tpye | Sealed, Gel, Flooded and User | Sealed, Gel, Flooded and User | Sealed, Gel, Flooded and User | Sealed, Gel, Flooded and User |
Self-consumption | ≤60mA(12V);≤30mA(24V) | ≤60mA(12V);≤30mA(24V) | ≤60mA(12V);≤30mA(24V) | ≤60mA(12V);≤30mA(24V) |
Grounding | Common negative | Common negative | Common negative | Common negative |
Communication | RS485(RJ45 interface) | RS485(RJ45 interface) | RS485(RJ45 interface) | RS485(RJ45 interface) |