Feature

●Generator actuator come with stable structure, excellent performance and long service life
●Suitable for working environments with frequent load changes and high frequency stability requirements
●Come with quickly response speed, high accuracy. Possess very flexible rotation and very small gap
●Suitable for generator sets below 300KW, used in conjunction with a normally closed controller
●Fuel pump actuator possess resistance, high finish and hardness, long service life


Description

Feature:
1. Suitable for working environments with frequent load changes and high frequency stability requirements
2. Suitable for generator sets below 300KW, used in conjunction with a normally closed controller
3. Come with quickly response speed, high accuracy. Possess very flexible rotation and very small gap
4. Fuel pump actuator possess resistance, high finish and hardness, long service life
5. Generator actuator come with stable structure, excellent performance and long service life


How to Use:



Specification:

Item Type: Fuel Pump Actuator
Specifications:
Voltage: 24V
Coil Resistance: 22 7.2±0.4Ω
Inductance: 120±20 Millihenries
Response Time: 15 Milliseconds
Working Temperature: 38 7.7Ω, 94 9.6Ω
Maximum Working Temperature: 125 10.6Ω
Normal Working Conditions:
When the Power is Turned On: There is a quick, crisp, small sound, normally open type 1 sound, normally closed type 2 sound.
If the actuator freezes, the sound is hoarse or not sound.
Life Span and Limit:
The empirical value of the life span is 5000 hours, the normally open type is 60008000 hours, and the normally closed type is 20005000 hours




Package List:
1 x Fuel Pump Actuator

Note:
1. The fuel must be and the oil filter must be replaced regularly.
2. The loading and unloading must be tightened according to the prescribed steps and the prescribed screw position sequence. Replace with new Orings every time you load and unload.
3. Normally open or normally closed actuators must be used with the same control panel, otherwise the starting speed will not increase, or the drive will go to high speed. This has nothing to do with the panel and the large bottom plate.