Feature

●Outer Dia.:42.5mm/1.67";Inner Dia. :Inner Dia. :35mm/1.37";Thickness (t):1.5mm/0.06"
●Hole Dia.:2.8mm/0.11";Opening width:3mm/0.11";Material:65Mn
●This External Retaining Ring is used to secure parts on shafts into a machined groove. It features durable steel construction for long-lasting use. Install with pliers.
●External circlip use for appliance repairs, bearing, gears, pulleys, and various repair projects.
●Spare parts with Metal housing. Durable and convenient to install.

Description

The following is the product explanation and application of the external circlip . Please select the size and material to be purchased according to the product information.

1.Installed in the hole, used as fixed axial movement of parts, the ring diameter slightly larger than the diameter of the outer diameter of the fitting hole.

2.When you install, must use snap ring pliers, insert the pliers tip into the clip hole of the circlips,cliptightly the circlip,then can be placed in the slot of the machined hole has been done previously.

External Circlip

Specifications:

Inner Dia. : d1

Hole Dia.: d2

Opening width: w

Material:304 Stainless Steel

Thickness (t) and Outer Dia.: Pls check the title.


External circlip can ensure the precise positioning of the bearing and maintain the tightening effect，when installing bearing washers.	External circlip is used for mounting and fixing bearings, gears, pulleys, etc., and for limiting positions.	External circlip is installed at the end positions of the rotating shaft and the moving shaft, such as the end of the vehicle wheel and the main shaft, to prevent the movement connection mechanism from shifting or loosening.


	29mm External Circlips	38mm External Circlips	11.7mm External Circlips	18mm External Circlips	14mm External Circlips
Material	65Mn	65Mn	304 Stainless Steel	304 Stainless Steel	304 Stainless Steel