Get the most out of your intercooler with this special Pre-Intercooler Cooling Pipe. When compressed air leaves your turbocharger or supercharger, air temperature of 350°F is normal. Youll want to get this air back down around ambient air temperature before it enters your engine, and this might be asking a lot from your intercooler! What if there were a way to drop the temperature of the air before letting it into your intercooler? Enter the Pre-Intercooler Cooling Pipe. Without adding any complexity or weight, this product cools your intake air while its on the way to your intercooler. This will enable your intercooler to cool down the air even more giving you more power or allow you to run a smaller intercooler saving space, weight, and money. Like an intercooler, this pipe is designed to remove a lot of heat from the intake air, increasing air density and power. Its made of 6061 aluminum and the fins are designed to transfer as much heat as possible. But unlike an intercooler, its smooth on the inside just like a straight section of pipe, so it wont add any drag, direction change, turbulence or pressure drop to your intake. This means it will integrate perfectly with any intake setup and guarantee an improvement in cooling performance with no drawbacks whatsoever. This is not intended to replace an intercooler. This product works because the difference between turbo outlet temperature and ambient air temperature is so high. It only bleeds off a portion of that heat, and your intercooler does the rest. The trick is heat dissipation - by cooling down the metal in your intake you cool your intake air. Intake manifold spac