[30A]
[50A]
1 x 30AMP Power Inlet
4 x Stainless Steel Screws
?Color: White
?Volt: 30A/125V
?Type: Wall Socket
?Rated Current: 125V
?AMPS: 30A
?Jacket: PVC Power Cord
?Grounding: Standard Grounding
?Male type: L5-30P
?Meterial: 100% Copper
|
|
|
---|---|---|
LOCKABLE INLETDesigned with grooves to hold tightly |
PROTECTIVE COVERWhite cover provides a protective shield to avoid damage and electrical failure caused by harsh weather conditions |
CLEAR CIRCUITCLEAR CIRCUIT Different colors correspond to different wires |
|
|
|
|
---|---|---|---|
STEP1Determine the mounting location. Be careful that the location you select does not go through any electrical wiring,plumbing or other obstruction.All power tools must be properly grounded. |
STEP2drill mounting holes using 1/8”drill bit. |
STEP3Pull internal wiring through hole. Note: The 30amp inlet requirs the use of 8AWG or 10AWG wire. Do not use smaller gauge wire as it will result in overheating and possible electrical fire. |
STEP4Use #8 pan head stainless steel screws to install the inlet. |
The inlet is super suitable for most camping RV marine shore power inlet.