Magneto Flywheel Stator Plate 90c 110cc 125cc Kick Start PIT PRO Trail Dirt Bike
Brand New Magneto Stator Plate Fit 90cc 110cc 125cc 140cc Kick Start Engine PIT PRO PIT Bike Trail Dirt Bike Thumpstar Quad ATV Go Kart Dune Buggy
Size:
Diameter of Plate around 115mm
Diameter of Center Hole around 18mm
Distance between mountiong holes (Center To Center) around 101mm
6 wires : white/blue, black/red, white, green/white, yellow
1 removable free wire:red/green
This stator also includes a 12v Lighting coil with leads. Just plug in your 12V headlight or use it to charge a battery. This assembly is perfect for replacing your broken trigger assembly which happens often when the Chain comes off and breaks off the ignition trigger!! Get your bike running again! you could also use this to convert a old Points motor over to electronic ignition although you still need to buy a CDI box.
GREEN W/WHITE = GOES TO GROUND IN MAIN HARNESS OR FRAME OR BOTH
BLUE W/WHITE = GOES TO THE CDI UNIT FROM THE PICKUP UNIT
BLACK W/RED= GOES TO THE CDI UNIT AND IS FROM THE EXCITER/PRIMARY COIL
WHITE = GOES TO THE REGULATOR/RECTIFIER TO CHARGE THE BATTERY,,, FROM THE STATOR CHARGING COIL
YELLOW = GOES TO REGULATOR/RECTIFIER TO RUN THE AC VOLTAGE HEADLIGHT,,, FROM THE STATOR LIGHTING COIL
To replace this part, you need to remove the flywheel. You need a 27mmx1mm backward thread flywheel puller available at most motorcycle shops
Fits XR/CRF 50, XR/CRF 70, Z50R(1988~1999), ZB50 and most pit bikes with 50cc, 70cc, 90cc, 110cc & 125cc motors(without electric starter).
Package Included: 1 x Magneto Flywheel Stator Plate
NOTE:PLEASE CHECK YOUR OLD STYLE BEFORE YOUR ODERING , THANKS .