Feature

●4 ohm 12 volt dual output universal ignition coil. For four cylinder bikes that require 2 dual output coils.
●Its a replica of a Suzuki ignition coil but the mounting hole spacing is quite universal. Bolts right up on some Honda twins, Kawasakis & Suzukis.
●Sold as a set of 2
●Dimensions: Mounting holes are 90mm (3.5") apart center to center. Overall distance to the end of the mounts = 104mm (4.1") Low tension wires (black and yellow) 390mm (15") long. Female spade connectors at the coil and 1 male bullet / 1 female bullet terminal at the other end Spark plug wires (high tension leads) 570mm (24") long with 300mm (12") protective sheath.
●Check Fitment Below


Description

Set of two dual output 4 ohm coils for many Kawasaki and Suzuki models. Freshen up that ignition with some new coils!

Dimensions:

Note: Some KZ1000 models with an electronic ignition have a ballast resistor which must be removed. Do research before ordering.

Fits Kawasaki:

KZ650B Z650 - 1977-1979
KZ650C Custom - 1977-1979
KZ650D SR - 1978-1979
KZ650E LTD - 1980
KZ650F Custom - 1980
KZ900A - 1976-1977
KZ900B LTD - 1976
KZ900C Police - 1976
Z1 900 - 1973-1975
Z1P Police 900 - 1975
KZ1000A - 1977-1978
KZ1000B LTD - 1977-1979
KZ1000A MKII - 1978-1979
KZ1000C Police - 1978-1979
KZ1000D Z1R - 1977-1979
KZ1000E - 1979
KZ1000G Z1 Classic - 1980

Fits Suzuki: 

GS550 - 1977-1979
GS550 Indy - 1977
GS550E - 1977-1979
GS550L - 1979
GS750 - 1977-1979
GS750B - 1977-1979
GS750C - 1977-1979
GS750EC 1977-1979
GS750EN 1977-1979
GS750L - 1979
GS750N - 1977-1979
GS850G - 1979
GS1000 - 1978-1979
GS1000C - 1978-1979
GS1000EC - 1978-1979
GS1000EN - 1978-1979
GS1000L - 1979
GS1000N - 1978-1979
GS1000S - 1979