This MCSADVENTURES turn signal kit is specifically designed for 2015-2018 Polaris RZR models with the 4 pin bed to chassis connector. May not fit Dynamix or Ride Command.
Note: only fits units with the 4 pin tail light harness plug on top of the rear frame under the bed as shown in picture. This is the harness that comes together from left/right tail lights and is under the bed near the driver side rear of the machine....NOT at the actual tail light plugs. It will be above the clutch cover at the rear of the machine. Please check your unit to verify fitment.
The rear T harness simply plugs into your factory 4 pin tail light harness utilizing the rear brake lights as turn signals.
An additional pigtail is included for a license plate light for those that need it (license plate light NOT included).
A heavy duty metal body column mounted switch was chosen for its durability and ease of use. Switch has hazard feature as well as a horn button on the end.
A loud deep throaty automotive style horn is included.
A green panel mount LED indicator is wired into the switch harness and easily mounts within view of the driver. This will illuminate and flash with the corresponding signal selected.
The switch is customized and prepared with plug and play connectors ready to install onto the machine. No adding additional wires or splicing. It simply plugs together.
Front turn signals mount into a 3/4" diameter hole (3 per side) and harness easily feeds through the firewall where it plugs into the switch harness.
Looking to add even more visibility to your front turn signals utilizing aftermarket LED lights or Fang lights? No problem, simply take our wire and connect them.
This is a complete well thought out kit fully tested and ready to install. Easy step by step instructions are included. Installs in most machines in less than an hour.