Feature
●Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge. Put the gauge in the hole and screw down.
●For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
●It takes about 30 seconds to get signal in the first time, but less than 3 seconds after that. It gets quicker under a clear view of the sky. Sometimes if signal is missing, pls. reconnect all wires and restart it.
●It shows current speed, odometer(can be adjustable), trip meter, COG and voltmeter. Press the back button to adjust unit(KM/H, KNOTS and MPH)
●Same backlight as picture shown. 12VDC/24VDC Working Voltage, 1 year Warranty, 100% waterproof and anti-fogging protection
[White]
[Black]
Description
Product Features:
-Suitable for all vehicles, boats and off-road vehicles
-The signal comes directly from the satellite signal receiver(GPS Speed Sensor)
-The gauge has the advantages of high precision, quick location confirmation and short start up time.
-IP67 waterproof and dustproof grade
-Stepper motors used for full range of stepping gauges, great feature with its less power consumption, longer life, higher precision, etc.
-With curved glass (with anti-fogging function)
-With ultra-wide working voltage design( long-term operating voltage: 9-32V, Maximum up to: 36V (≤ 1 min)).
Product Introduction
|
|
|
|
|---|---|---|
How to connect wires?Red wire --- Power Positive. Black wire --- Power negative. Please note: GPS Speedometer can be connected to 12VDC and 24VDC power directly. |
Why does LCD show Err?- Turn on supply power after installation. - Then the meter starts to search for signal and LCD will count automatically. - If there is still no signal when LCD counts to 300. the LCD displays "Err". |
GPS Speedometer keeps counting?- After installation in the first time, GPS speedometer needs to search for signal, thats the reason that LCD counts numbers all the time. - After getting signal, LCD will come back to 0. It is normal. |
How to install it ?
- Cut an 85mm (3 3/8") hole in the panel and allow a clearance of 55mm (2 3/16”) behind the panel to fit the gauge.
- Put the gauge in the hole and screw down.
- For the GPS antenna, you should securely fasten it in the flat position, black side upwards, preferably outside (or inside front windscreen) so that it has a clear view of the sky to pick up satellite signal. Connect the antenna cable to socket in the back of the gauge. And do not cut cable.
|
|
|
|
|
|
|
|---|---|---|---|---|---|---|
| 999 (MPH, Knots, Km/h adjustable) | 999 (MPH, Knots, Km/h adjustable) | 999 (MPH, Knots, Km/h adjustable) | 999 (MPH, Knots, Km/h adjustable) | 999 (MPH, Knots, Km/h adjustable) | 999 (MPH, Knots, Km/h adjustable) | |
| size | 85mm | 52mm | 52mm | 85mm | 85mm | 85mm |
| color | white+stainless steel | black+stainless steel | black+black | white+stainless steel | white+stainless steel | black+black |
| Indicating Range | 0-999 (MPH, Knots, Km/h adjustable) | 0-999 (MPH, Knots, Km/h adjustable) | 0-999 (MPH, Knots, Km/h adjustable) | 0-999 (MPH, Knots, Km/h adjustable) | 0-999 (MPH, Knots, Km/h adjustable) | 0-999 (MPH, Knots, Km/h adjustable) |
| Type | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer | GPS speedometer |
| adjustable odometer | yes | yes | no | no | no | yes |
Package Includes:
1x GPS speedometer
1x GPS Antenna
1x Multi-plug socket
1x Installation Instruction